available
Detailed features
Foot pump 4L 500 mbar
For inflating and deflating tires or boats made of coated synthetic material.
Characteristics of the 4L foot inflator
- Glass-filled polyamide flanges.
- Bellows made of reinforced coated fabric.
- Stainless steel metal parts.
- Reinforced hose.
- Max pressure 500 mbar / 7.2 psi
- Dimensions 28 x 21 x H 6 cm
In the same category
4 other products seleted for you-
<h2>Horizon 260S tender with slatted floor and wooden seat</h2>
<p>Tender made of 1100 Decitex PVC, abrasion and UV resistant, light grey colour, with black wooden bench seat. The transom is made of painted wood with a PVC angle on the top edge to prevent water from entering. Slatted bottom, painted wooden slats 15 cm wide. Black polypropylene grip with yellow thread of 10 mm diameter for a good grip and excellent resistance. Delivered with carry bag, repair kit, inflator and 2 paddles. Passages and paddle storage in high resistance PVC</p>
available
-
<h2>Rigid dinghy PRS 210 from Plastimo</h2>
<p>With an incomparable stability and a low weight, the PRS 210 rigid dinghy is equipped with a single rear wheel for easy handling. Made of anti-UV treated polyethylene, the dinghy is very resistant and easy to maintain.</p>
<h2>Characteristics of the PRS 210 rigid dinghy</h2>
available
-
<h2>Fulton outboard motor lock</h2>
<p>This anti-theft device is ideal for securing your dinghy or inflatable boat outboard motor. It is made of high resistance steel.</p>
<h2>Detailed specifications</h2>
available
-
available
• 
