Lacquers and primers

Concerned about the maintenance of your boat, we offer you lacquers and primers. This to facilitate your maintenance.

There are 25 products.

Active filters

  • <div class="fiche-txt"> <h2>Nautical's single-component gloss lacquer in 2.5 litres</h2> <div class="fiche-txt">This lacquer will allow you to have a durable glossy finish on the surface. Very easy to apply to all properly prepared surfaces. Dilution is not required.</div> <div class="fiche-txt"></div> <h2>The characteristics of Nautical's single-component gloss lacquer</h2> </div>
    available
    NAUTICAL

    Mono-component glossy lacquer 2,5L

    • €60.42
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Nautical's primer &amp; undercoat for exposed areas</h2> <div class="fiche-txt">This product has two possible uses: as a primer or as an undercoat. It is easy to apply and quick drying. It is recommended for use before Nautical Gloss Enamel. <strong>Be careful not to overcoat with two-component products.</strong></div> <div class="fiche-txt"></div> <h2>The characteristics of Nautical's primer &amp; undercoat for exposed areas</h2> </div>
    available
    NAUTICAL

    Primer & undercoat for exposed areas

    • €12.08
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Nautical's one-component gloss lacquer</h2> <div class="fiche-txt">This lacquer will allow you to have a durable glossy finish on the surface. Very easy to apply to all properly prepared surfaces. Dilution is not required.</div> <div class="fiche-txt"></div> <h2>The characteristics of Nautical's single-component gloss lacquer</h2> </div>
    available
    NAUTICAL

    Single-component gloss lacquer 0,75L

    • €16.58
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Nautical's quick-drying underwater primer</h2> <div class="fiche-txt">This primer is a single component, it is used before NAUTICAL semi-erodible antifouling. It can be applied as a barrier layer over an old antifouling. Previous antifoulings in poor condition must be removed with a suitable stripper. <strong>Be careful not to overcoat with two-component products.</strong></div> <div class="fiche-txt"></div> <h2>The characteristics of Nautical's quick-drying underwater primer</h2> <ul><li>Grey</li> </ul></div>
    available
    NAUTICAL

    Quick-drying primer for immersed parts

    • €13.75
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Euromarine masking tapes</h2> <div class="fiche-txt">This is a strip of adhesive paper that will allow you to make clean paint and antifouling lines on your boat. Available in different widths.</div> <div class="fiche-txt"></div> <h2>Characteristics of Euromarine masking tapes</h2> </div>
    available
    EUROMARINE

    Masking tapes

    • €2.42
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Batbets Interstain Mahogany Nail Polish by International</h2> <div class="fiche-txt">This varnish will allow you to revive and restore the color of your discolored wood. It has a very good resistance to discoloration for interior and exterior use. It can be mixed with single-component varnishes to obtain a darker shade.</div> <div class="fiche-txt"></div> <h2>Features of Batbets Interstain Mahogany Varnish by International</h2> </div>
    available
    INTERNATIONAL

    BATBETS INTERSTAIN Varnish

    • €17.08
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Danboline undercoat and topcoat by International</h2> <div class="fiche-txt">It will provide you with an abrasion resistant coating for holds, trunks and bulkheads. It is resistant to smoke, gasoline and oil. It has a high opacity for good coverage. It requires little maintenance and is very easy to clean.</div> <div class="fiche-txt"></div> <h2>The characteristics of Danboline undercoat and topcoat by International</h2> </div>
    available
    INTERNATIONAL

    DANBOLINE undercoat and topcoat

    • €29.95
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International Interdeck Undercoat and Topcoat</h2> <div class="fiche-txt">It is a polyurethane paint that is non-slip for the deck of your boat. Containing a fine mineral additive, it is very resistant to abrasion. It has the advantage of being suitable for all surfaces and the finish will be low gloss to avoid reverberation.</div> <div class="fiche-txt"></div> <h2>Features of International Interdeck Undercoat and Topcoat</h2> </div>
    available
    INTERNATIONAL

    INTERDECK undercoat and topcoat

    • €37.08
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International Perfection Underlay</h2> <div class="fiche-txt">This undercoat is a high performance two component polyurethane finish. Its chemical cure provides a more durable finish and better abrasion resistance. Very good anti-UV protection, it has a range of shades with reinforced and durable gloss. Very easy to use, it will allow you to obtain a professional quality result.</div> <div class="fiche-txt"></div> <h2>Features of International Perfection Underlay</h2> </div>
    available
    INTERNATIONAL

    PERFECTION finishing underlay

    • €47.50
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>TOPLAC undercoat and topcoat by International</h2> <div class="fiche-txt">This premium quality lacquer is high gloss and durable. Its silicone alkyd formulation is twice as durable as a traditional single-component lacquer. It also has very good UV resistance. It is very easy to apply and will give you a deep, glossy colour.</div> <div class="fiche-txt"></div> <h2>The characteristics of TOPLAC de International undercoat and topcoat</h2> </div>
    available
    INTERNATIONAL

    TOPLAC undercoat and topcoat

    • €19.16
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International's Interprime 880 two-component epoxy undercoat</h2> <div class="fiche-txt">This single component undercoat will be easy to sand, and will allow you to obtain a very good base for polyurethane finishes like Interspray 800 and Interspray 900. It will protect your metal surfaces during sanding thanks to its anticorrosive properties.</div> <div class="fiche-txt"></div> <h2>Features of International's Interprime 880 two component epoxy undercoat</h2> </div>
    available
    INTERNATIONAL

    INTERPRIME 880 two-component epoxy undercoat

    • €65.00
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International Perfection Undercoat</h2> <div class="fiche-txt">It is a high performance polyurethane undercoat. It is a two component product, so it should not be applied over one component products. International Perfection Undercoat provides an excellent base for a long lasting glossy finish. It is easy to apply, quick drying and easy to sand. It has a satin finish.</div> <div class="fiche-txt"></div> <h2>Features of International Perfection Undercoat</h2> </div>
    available
    INTERNATIONAL

    Perfection Undercoat two-component undercoat

    • €50.00
    Shipped according to supplier's deadline
    Customize
  • <div> <h2>International Interior Primer 860</h2> <div>This epoxy primer is high performance. It has a low VOC content. It has been specially designed for interior use in all types of construction. Its drying time is fast, which will allow you a short application. It will provide excellent corrosion protection.</div> <div></div> <h2>International Interior Primer 860 Features</h2> </div>
    available
    INTERNATIONAL

    Interior Primer 860

    • €170.42
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>Watertite from International</h2> <div class="fiche-txt">This primer is two-component. It has a very good resistance to water. You can use it for both emerged and immersed areas. These finishes are matte.</div> <div class="fiche-txt"></div> <h2>Features of International Watertite Primer</h2> </div>
    available
    INTERNATIONAL

    WATERTITE Primer

    • €22.50
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>The International Yacht Primer</h2> <div class="fiche-txt">This conventional primer is a single component. It will be perfect for use in exposed areas. It is very fast drying and has anti-corrosive properties. It has pigments with aluminium particles and offers a real anti-corrosive barrier.</div> <div class="fiche-txt"></div> <h2>Features of the International Yacht Primer</h2> </div>
    available
    INTERNATIONAL

    Yacht Primer

    • €36.67
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>VC Prop-O-Drev Primer for base and propeller protection</h2> <div class="fiche-txt">It is specially designed for use on bases, propellers and propeller shafts. It will give you excellent adhesion on metal and on surfaces covered with original paints.</div> <div class="fiche-txt"></div> <h2>The characteristics of the VC Prop-O-Drev Primer for the protection of bases and propellers</h2> </div>
    available
    INTERNATIONAL

    VC Prop-O-Drev Primer

    • €22.92
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>INTERPRIME 450 Epoxy Primer from International</h2> <div class="fiche-txt">This primer is very waterproof and has an excellent anticorrosive power. It can be applied directly to steel and aluminium surfaces that have been previously prepared. It has a matt finish. It comes in a 17.5 L container.</div> <div class="fiche-txt"></div> <h2>Characteristics of International INTERPRIME 450 epoxy primer</h2> </div>
    available
    INTERNATIONAL

    INTERPRIME 450 epoxy primer

    • €506.25
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>The VC TAR 2 primary from International</h2> <div class="fiche-txt">This primer will protect your polyester against osmosis and provide an excellent corrosion barrier for metal substrates. With this primer you will not need to sand between coats as it has a self-levelling formulation. It is ideal for antifouling.</div> <div class="fiche-txt"></div> <h2>Features of the International VC TAR 2 Primer</h2> </div>
    available
    INTERNATIONAL

    VC TAR 2 Primer

    • €54.17
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International INTERPRIME 820 Epoxy Primer</h2> <div class="fiche-txt">This epoxy primer is a two-component primer that will offer you high performance. This primer is applicable on steel and on aluminium. Moreover, you can use it on both emerged and immersed areas. It will allow an excellent anticorrosive protection.</div> <div class="fiche-txt"></div> <h2>Characteristics of International INTERPRIME 820 epoxy primer</h2> </div>
    available
    INTERNATIONAL

    INTERPRIME 820 epoxy primer

    • €205.00
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International's Interprotect primer</h2> <div class="fiche-txt">This two-component epoxy primer is fast drying. It is very easy to apply. It offers excellent anti-corrosive protection. It can be used as a bonding coat on an epoxy primer. Be careful, it should not be applied on a single component product or on an antifouling.</div> <div class="fiche-txt"></div> <h2>Features of International's Interprotect primer</h2> </div>
    available
    INTERNATIONAL

    INTERPROTECT waterproofing and anti-corrosion primer

    • €40.42
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International Primocon Primary</h2> <div class="fiche-txt">This conventional primer is single component and is ideal for use in submerged areas. It dries very quickly and has anti-corrosive properties. It has the particularity of being able to be used under all INTERNATIONAL antifouling or as an insulating layer over <span class="notranslate">non-INTERNATIONAL</span> antifouling.</div> <div class="fiche-txt"></div> <h2>Features of International Primocon Primer</h2> </div>
    available
    INTERNATIONAL

    PRIMOCON waterproofing and anti-corrosion primer

    • €30.42
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International's Epoxy GP Coating Primer</h2> <div class="fiche-txt">This primer is applicable on pre-treated steel, aluminium and plywood. Its overcoating time is extended when overcoated with a bi-component.</div> <div class="fiche-txt"></div> <h2>Features of International Epoxy GP Coating</h2> </div>
    available
    INTERNATIONAL

    Primer EPOXY GP COATING

    • €183.34
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>International Clear Wood Sealer Fast Dry two-component primer</h2> <div class="fiche-txt">This two-component polyurethane primer is colourless and has the advantage of being quick drying. Thus you can apply up to 4 coats in one day. It can be used indoors and outdoors. It will provide you with a scratch resistant, shock resistant and weatherproof film. Attention the BASE (A) and the Hardener are sold independently in 5 liter cans. It is necessary to mix the 2 to obtain the applicable bi-component primer.</div> <div class="fiche-txt"></div> <h2>Features of International Clear Wood Sealer Fast Dry two-component primer</h2> </div>
    available
    INTERNATIONAL

    Two-component primer CLEAR WOOD SEALER FAST DRY

    • €180.00
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>The Gelshield Plus Kit from International</h2> <div class="fiche-txt">This epoxy primer is a non solvent based osmosis treatment. It is compatible with different substrates: fully cured polyester and epoxy coatings. Please note that this Gelshield Plus Kit should not be applied directly to the gelcoat.</div> <div class="fiche-txt"></div> <h2>Features of the Gelshield Plus Kit from International</h2> </div>
    available
    INTERNATIONAL

    Epoxy primer GELSHIELD PLUS KIT

    • €191.67
    Shipped according to supplier's deadline
    Customize
  • <div class="fiche-txt"> <h2>The International Gelshield 200</h2> <div class="fiche-txt">This is a protective epoxy primer that will protect your polyester against osmosis. It has the advantage of being very fast drying and easy to apply. You can apply several coats in one day. It requires 5 coats to protect against osmosis.</div> <div class="fiche-txt"></div> <h2>Features of the International Gelshield 200</h2> </div>
    available
    INTERNATIONAL

    GELSHIELD 200 primer

    • €46.67
    Shipped according to supplier's deadline
    Customize

Showing 1-25 of 25 item(s)