available
Detailed features
Ronstan 20mm Single Orbit Pulley with Lashing
No metal elements in these Orbit pulleys, everything is made of high tech polymer resin capable of supporting high loads. The special feature of the Orbit blocks is also the optimization of the ball track which frees up the central part of the block hub, thus limiting the weight and allowing the lashing to pass through the dyneema garcette. The 20 Orbit series can only be used on dinghy and catamaran trimmers up to 5 meters. Very light and able to support a working load of 250 kilos for a break of 550 kilios for a weight of 9 grams, it is one of the most performing blocks in its category.
Features of the Ronstan RF25109 Orbit 20mm Single Pulley with Lashing
Comes with a 750mm x 1.7mm diameter lashing tool
| Diameter | 20 mm |
| Max. rope diameter | 6 mm |
| Workload | 250 kg |
| Breaking load | 550 kg |
| Weight | 9 gr |
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Wichard's friction ring</h2>
<div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the Wichard FRX friction ring</h2>
</div>
available
-
<p>Like the other models in the same range, this pulley is ideal for small synthetic fibre ropes. It has a patented bearing system that uses stainless steel balls.</p>
<p>The 467 pulley is equipped with a narrow sheave for extremely fine adjustment bumps.</p>
available
-
<div class="fiche-txt">
<h2>Ronstan's range of 30mm Orbit Single Pulleys</h2>
<div class="fiche-txt">No metal elements in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit pulleys is also the optimization of the ball track, which frees up the central part of the pulley hub and thus limits the weight. The 30 Series Orbit Simple is a range of single blocks, flat deck, stand up or suspended, used for mainsail and spinnaker sheets in dinghies, catamarans and sport keelboats up to 5 meters. Very light and withstanding a working load of 300 kilos for a break of 600 kilios for a compact weight, these are all-purpose blocks that are efficient and light for ropes with a maximum diameter of 8mm.</div>
<div class="fiche-txt"></div>
<h2>Ronstan Orbit 30mm Single Pulley Features</h2>
</div>
available
-
<p>This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.</p>
available
• 
