available
€90.00 Tax included
check_circle
In stock
-
Livraison en points relais : Gratuit
Une question ?
+33 2 97 11 80 95
In the same category
4 other products seleted for you-
<p><span>This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.</span></p>
available
-
<div class="fiche-txt">
<h2>Wichard's friction ring</h2>
<div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the Wichard FRX friction ring</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The WICHARD 10 mm rope pulley</h2>
<div class="fiche-txt">This pulley is suitable for heavy loads. It is ideal for static manoeuvres. The sheave is protected by the flanges. Its universal head allows a large choice of attachments. Available with or without balls. Without balls, you can easily use it for mainsail hoists, halyards, boom vang, spinnaker vang and mast step. With balls, the block has two rows of balls on the sides, which gives it excellent performance under light loads. In this case, you can use it for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD 10 mm rope pulley</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan RF8080 shock pulleys</h2>
<div class="fiche-txt">The Shock Friction Pulley is the newest addition to the Ronstan pulley range. It is made of aluminium, which makes it very light. It accepts a 6 mm diameter rope. The breaking load is 350 kg.</div>
<div class="fiche-txt"></div>
<h2>Features of Ronstan's RF8080 shock pulleys</h2>
</div>
available
• 
