available
Detailed features
Harken T2 Block Carbo Pulley:
This Harken model has no metal rivets or shackles, the heavy-duty Carbo T2 tackle block is made of composite materials. The version or double can be attached by knotted or spliced transfers to almost any element. These blocks can be used to adjust cars, mainsheet or vang sheets, to create stepped hoists or bridle systems and any other system that requires lightweight blocks.
Detailed characteristics of the pulley
- Dyneema rope included
| Diameter | 4 mm | 4.8 mm | 6.4 mm | 7.9 mm | 9.5 mm | 12.7 mm |
| Height | 22 mm | 27 mm | 39 mm | 48 mm | 53 mm | 64 mm |
| Width | 10 mm | 10 mm | 14 mm | 16 mm | 16 mm | 19 mm |
| UDL | 800 kg | 1400 kg | 2300 kg | 3600 kg | 5800 kg | 7700 kg |
| PL | 600 kg | 800 kg | 1400 kg | 2700 kg | 4500 kg | 7500 kg |
| Weight | 5 g | 15 g | 30 g | 65 g | 90 g | 165 g |
- Version 18 single / double
- Sheave diameter: 18 mm / 18 mm
- Length: 28 mm / 28 mm
- Weight: 7g / 17g
- Maximum string diameter: 5 mm / 5 mm
- Maximum working load: 125 kg / 204 kg
- Breaking load: 450 kg / 680 kg
- Version 29 single / double
- Sheave diameter: 29 mm / 29 mm
- Length: 43 mm / 43 mm
- Weight: 12g / 24g
- Maximum string diameter: 8 mm / 8 mm
- Maximum working load: 150 kg / 272 kg
- Breaking load: 454 kg / 861 kg
- Version 40 single / double
- Sheave diameter: 40 mm / 40 mm
- Length: 57 mm / 57 mm
- Weight: 25g / 48g
- Maximum string diameter: 10 mm / 10 mm
- Maximum working load: 220 kg / 317 kg
- Breaking load: 544 kg / 952 kg
In the same category
4 other products seleted for you-
<p>Like the other models in the same range, this pulley is ideal for small synthetic fibre ropes. It has a patented bearing system that uses stainless steel balls.</p>
<p>The 467 pulley is equipped with a narrow sheave for extremely fine adjustment bumps.</p>
available
-
<p>This bullet pulley has a low coefficient of friction for guiding bumps to the rear. It is compact and lightweight, with fast engagement and release under high or light loads.</p>
available
-
<div class="fiche-txt">
<h2>The WICHARD 10 mm rope pulley</h2>
<div class="fiche-txt">This pulley is suitable for heavy loads. It is ideal for static manoeuvres. The sheave is protected by the flanges. Its universal head allows a large choice of attachments. Available with or without balls. Without balls, you can easily use it for mainsail hoists, halyards, boom vang, spinnaker vang and mast step. With balls, the block has two rows of balls on the sides, which gives it excellent performance under light loads. In this case, you can use it for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD 10 mm rope pulley</h2>
</div>
available
-
<div class="fich-txt">
<h2>The WICHARD single pulley for 8-9 mm rope</h2>
<div class="fich-txt">This pulley is available in different versions with or without balls. Its universal head will allow a wide choice of fixations. It has an excellent resistance to heavy loads. The sheave is protected by the flanges. With balls, you can use it for mainsheet and track, spinnaker sheets and arms, genoa sheets and backstays. Without balls, you can use it for mainsheet hoists, halyards, boom vang and spinnaker sheets for sport catamarans and small keelboats. The fittings are in 316L stainless steel, the flanges in polycarbonate and the sheave in composite.</div>
<div class="fich-txt"></div>
<h2>The characteristics of the WICHARD single pulley for 8-9 mm rope</h2>
</div>
available
• 
