available
Detailed features
WICHARD triple pulleys for 8-9 mm rope
These pulleys are suitable for heavy loads and static manoeuvres. The 45 sheave rotates around the stainless steel shaft and is protected by the flanges. The universal head of these pulleys allows a wide choice of attachments. Available with or without balls. Without balls, they are perfect for mainsail hoists, halyards, boom vang, spinnaker sheets for sport catamarans and small keelboats. With balls, they have two rows of lateral balls, which gives them a very good performance under light load. Under high load, the forces are taken up by the stainless steel shaft without lateral friction. You can use them for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.
Characteristics of the WICHARD triple pulleys for 8-9 mm rope
- EM: Manila Swan
- EMR: Emerillon Manille Ringot
- EMRT : Swivel shackle Ringot cleat
| Designation | EM | EMR | EMRT |
| Height | 84 mm | 101 mm | 101 mm |
| Width | 37 mm | 37 mm | 66 mm |
| Thickness | 58 mm | 58 mm | 60 mm |
| C.T | 560 kg | 560 kg | 200 kg |
| C.R | 1,000 kg | 1,000 kg | 1,000 kg |
| Weight | 0,149 kg | 0,157 kg | 0.208 kg |
In the same category
4 other products seleted for you-
<p>This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.</p>
available
-
<div class="fiche-txt">
<h2>Ronstan 30mm Single Orbit Pulley with Lashing Head</h2>
<div class="fiche-txt">No metal parts in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit blocks is also the optimization of the ball track, which frees up the central part of the block hub, thus limiting the weight and allowing the passage of lashing or dyneema link. The 30 Orbit series is used on mainsail and spinnaker sheets for dinghies, catamarans and sport keelboats up to 5 meters. Very light and with a working load of 300 kilos for a break of 600 kilios for a weight of 22 grams, it is one of the most performing blocks in its category.</div>
<div class="fiche-txt"></div>
<h2>Features of the Orbit 30mm Lashing Head Ronstan RF35101 single pulley</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The WICHARD 10 mm rope pulley</h2>
<div class="fiche-txt">This pulley is suitable for heavy loads. It is ideal for static manoeuvres. The sheave is protected by the flanges. Its universal head allows a large choice of attachments. Available with or without balls. Without balls, you can easily use it for mainsail hoists, halyards, boom vang, spinnaker vang and mast step. With balls, the block has two rows of balls on the sides, which gives it excellent performance under light loads. In this case, you can use it for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD 10 mm rope pulley</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Harken T2 Block Carbo Pulley:</h2>
<p>This Harken model has no metal rivets or shackles, the heavy-duty Carbo T2 tackle block is made of composite materials. The version or double can be attached by knotted or spliced transfers to almost any element. These blocks can be used to adjust cars, mainsheet or vang sheets, to create stepped hoists or bridle systems and any other system that requires lightweight blocks.</p>
</div>
<h2>Detailed characteristics of the pulley</h2>
available
• 
