available
Detailed features
The WICHARD 10 mm rope pulley
This pulley is suitable for heavy loads. It is ideal for static manoeuvres. The sheave is protected by the flanges. Its universal head allows a large choice of attachments. Available with or without balls. Without balls, you can easily use it for mainsail hoists, halyards, boom vang, spinnaker vang and mast step. With balls, the block has two rows of balls on the sides, which gives it excellent performance under light loads. In this case, you can use it for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.
Characteristics of the WICHARD 10 mm rope pulley
- EM: Emerillon Maniell
- EMR: Emerillon Manille Ringot
- EMT : Swivel shackle cleat
- EMRT : Swivel shackle Ringot cleat
- EMD : Halyard Swivel
- EMDRT : Swivel Halyard Snap Hitch
| Designation | EM | EMR | EMT | EMRT | EMD | EMDRT |
| Height | 130 mm | 150 mm | 130 mm | 150 mm | 143 mm | 163 mm |
| Width | 49 mm | 49 mm | 86 mm | 86 mm | 49 mm | 86 mm |
| Thickness | 26 mm | 26 mm | 86 mm | 86 mm | 49 mm | 86 mm |
| C.T | 560 kg | 560 kg | 360 kg | 360 kg | 560 kg | 360 kg |
| C.R | 1,000 kg | 1,000 kg | 1,000 kg | 1,000 kg | 1,000 kg | 1,000 kg |
| Weight | 0.147 kg | 0,156 kg | 0,240 kg | 0,249 kg | 0,171 kg | 0,273 kg |
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Wichard's friction ring</h2>
<div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the Wichard FRX friction ring</h2>
</div>
available
-
<div class="fiche-txt">
<h2>WICHARD triple pulleys for 8-9 mm rope</h2>
<div class="fiche-txt">These pulleys are suitable for heavy loads and static manoeuvres. The 45 sheave rotates around the stainless steel shaft and is protected by the flanges. The universal head of these pulleys allows a wide choice of attachments. Available with or without balls. Without balls, they are perfect for mainsail hoists, halyards, boom vang, spinnaker sheets for sport catamarans and small keelboats. With balls, they have two rows of lateral balls, which gives them a very good performance under light load. Under high load, the forces are taken up by the stainless steel shaft without lateral friction. You can use them for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD triple pulleys for 8-9 mm rope</h2>
</div>
available
-
<div class="fich-txt">
<h2>The WICHARD single pulley for 8-9 mm rope</h2>
<div class="fich-txt">This pulley is available in different versions with or without balls. Its universal head will allow a wide choice of fixations. It has an excellent resistance to heavy loads. The sheave is protected by the flanges. With balls, you can use it for mainsheet and track, spinnaker sheets and arms, genoa sheets and backstays. Without balls, you can use it for mainsheet hoists, halyards, boom vang and spinnaker sheets for sport catamarans and small keelboats. The fittings are in 316L stainless steel, the flanges in polycarbonate and the sheave in composite.</div>
<div class="fich-txt"></div>
<h2>The characteristics of the WICHARD single pulley for 8-9 mm rope</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Harken T2 Block Carbo Pulley:</h2>
<p>This Harken model has no metal rivets or shackles, the heavy-duty Carbo T2 tackle block is made of composite materials. The version or double can be attached by knotted or spliced transfers to almost any element. These blocks can be used to adjust cars, mainsheet or vang sheets, to create stepped hoists or bridle systems and any other system that requires lightweight blocks.</p>
</div>
<h2>Detailed characteristics of the pulley</h2>
available
• 
