available
Detailed features
This block is one of Harken's smallest blocks. It is ideal for small synthetic fiber tuning lines on Hi-Tech dinghies. It features a patented bearing system that uses stainless steel balls captured in a groove
| Sheave diameter | Maximum rope diameter | Length | Weight | Maximum workload | Breaking load | |
| Simple | 16 mm | 5 mm | 38 mm | 12 g | 113 kg | 544 kg |
| Double | 16 mm | 5 mm | 54 mm | 28 g | 204 kg | 544 kg |
| Triple | 16 mm | 5 mm | 57 mm | 43 g | 318 kg | 544 kg |
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>WICHARD 10 mm rope triple pulleys</h2>
<div class="fiche-txt">These blocks are available with or without balls. Without balls, you can use them for mainsheet hoists, halyards, boom vang, spinnaker pole vang and mast step. With balls, you can use it for mainsheet and mainsheet tracks, spinnaker sheets and arms, genoa sheets and runners. With its excellent resistance to heavy loads, it will allow you a large choice of fasteners thanks to its universal head.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD 10 mm triple pulleys</h2>
</div>
available
-
<p>This bullet pulley has a low coefficient of friction for guiding bumps to the rear. It is compact and lightweight, with fast engagement and release under high or light loads.</p>
available
-
<div class="fiche-txt">
<h2>Wichard's friction ring</h2>
<div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the Wichard FRX friction ring</h2>
</div>
available
-
available
• 
