unavailable
Detailed features
The classic-tex mini spool from FSE ROBLINE
It is a rope that consists of 3 twisted XLF cords.
Characteristics of the FSE ROBLINEclassic-tex mini spool
- Material: XLF
- Diameter: 3 mm
- Length : 15 m
- Breaking load: 150 daN
- Weight: 5 g/m
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>A cleat to store your ropes to clear the cockpit</h2>
<p>This rope storage cleat is ultra practical, it can be aimed and allows you to easily store your ropes to free up space and avoid knots!</p>
<h2>Features of the Line Tamer rope storage</h2>
</div>
available
-
available
-
<div class="fiche-txt">
<h2>Orion 500 polyester multipurpose rope from FSE ROBLINE</h2>
<div class="fiche-txt">This rope has a 16 plait braided sheath associated with a thread. Made of high quality polyester.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the Orion 500 polyester multipurpose rope from FSE ROBLINE</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The D-Spicer kit to make your own dyneema splices and loops</h2>
<p>The <strong>D-Splicer</strong> is a reference tool for sailors, riggers and sportsmen who make their own splices and loops on modern ropes. The conventional technical limits of splitting with hollow needles are beginning to be reached, especially with Dyneema ropes under 4mm diameter, as these can become a real challenge to split for splicing.</p>
<p><span>The handle of the D-splicer is made of anodized aluminum, this type of aluminum is reinforced by a surface treatment which confers a corrosion resistance to him, as for its needle it is out of stainless steel to resist the wet and salty environment.</span></p>
<p>The D-Splicer is suitable for the finest ropes (<strong>less than 4mm</strong>) and in other situations where conventional needles would not work.</p>
<h2>Detailed features of the D-splicer kit</h2>
</div>
available
• 
