available
Set of 5 needles | Picksea
  • Set of 5 needles | Picksea

Set of 5 needles

See detailed specifications

€5.46 Tax included

check_circle In stock
Une question ? +33 2 97 11 80 95

Une question ? +33 2 97 11 80 95

Detailed features

Euromarine 5-pin kit

These needles are made of hardened nickel-plated steel, to ensure easy needle penetration. This kit is perfect for stuffing (and wrapping), leather (heavy canvas), sail (tent), rugs and weaving (bag).

Features of the Euromarine 5-needle kit

  • 1 curved needle 40 mm
  • 1 straight needle 40 mm
  • 2 straight needles 60 mm
  • 1 straight needle with raised tip 100 mm

In the same category

4 other products seleted for you
  • available
  • <div class="fiche-txt"> <h2>Kit of 4 hollow needles to make your splices and caulking</h2> <p>This set of 4 splicing needles is designed to facilitate the splicing of ropes or braided halyards (especially Dyneema). The needles are adapted to ropes from ø4 to ø10 mm, and they are accompanied by a splicing manual for 3-strand ropes.</p> <h2>Detailed characteristics of the Set of 4 Hollow Needles to splice by Euromarine</h2> </div>
    available
  • available
  • <div class="fiche-txt"> <h2>The D-Spicer kit to make your own dyneema splices and loops</h2> <p>The <strong>D-Splicer</strong> is a reference tool for sailors, riggers and sportsmen who make their own splices and loops on modern ropes. The conventional technical limits of splitting with hollow needles are beginning to be reached, especially with Dyneema ropes under 4mm diameter, as these can become a real challenge to split for splicing.</p> <p><span>The handle of the D-splicer is made of anodized aluminum, this type of aluminum is reinforced by a surface treatment which confers a corrosion resistance to him, as for its needle it is out of stainless steel to resist the wet and salty environment.</span></p> <p>The D-Splicer is suitable for the finest ropes (<strong>less than 4mm</strong>) and in other situations where conventional needles would not work.</p> <h2>Detailed features of the D-splicer kit</h2> </div>
    available