available
Detailed features
Splicing needles of all sizes and for all purposes!
This splicing needle is a rather rigid metal rod bent in two and ending with a fixed handle. It works in the opposite way to the hollow needle, in fact this one is used by pulling the needle and not by pushing it.
XL Series fixed needles are also available in long sizes (50 cm) for sizes F15, F20 and F25. Those -These are made for professional riggers.
The different needle sizes and diameters
| Name | Needle in mm | Length | Ropes in mm |
| F10 | 1 mm | 25 cm | 0 - 2 mm |
| F15 | 1.5 mm | 25 cm | 2 - 4 mm |
| F20 | 2 mm | 25 cm | 4 - 6 mm |
| F25 | 2.5 mm | 25 cm | 8 - 6 mm |
| XL15 | 1.5 mm | 50 cm | 2 - 4 mm |
| XL20 | 2 mm | 50 cm | 4 - 6 mm |
| XL25 | 2.5 mm | 50 cm | 8 - 6 mm |
You might also like 1 other product seleted for you
-
<div class="fiche-txt">
<h2>The D-Spicer kit to make your own dyneema splices and loops</h2>
<p>The <strong>D-Splicer</strong> is a reference tool for sailors, riggers and sportsmen who make their own splices and loops on modern ropes. The conventional technical limits of splitting with hollow needles are beginning to be reached, especially with Dyneema ropes under 4mm diameter, as these can become a real challenge to split for splicing.</p>
<p><span>The handle of the D-splicer is made of anodized aluminum, this type of aluminum is reinforced by a surface treatment which confers a corrosion resistance to him, as for its needle it is out of stainless steel to resist the wet and salty environment.</span></p>
<p>The D-Splicer is suitable for the finest ropes (<strong>less than 4mm</strong>) and in other situations where conventional needles would not work.</p>
<h2>Detailed features of the D-splicer kit</h2>
</div>
available
In the same category
4 other products seleted for you-
<h2>Mooring protection</h2>
<p>Plastimo's Spiroll Mooring Protection is a clever sleeve that wraps around the friction areas of your mooring lines to protect them from premature wear and tear and also to reduce noise in the mooring cleats. Easy to install and remove thanks to its roll-up system.</p>
<h2>Detailed characteristics of the mooring line holder</h2>
available
-
<div class="fiche-txt">
<h2>Kit of 4 hollow needles to make your splices and caulking</h2>
<p>This set of 4 splicing needles is designed to facilitate the splicing of ropes or braided halyards (especially Dyneema). The needles are adapted to ropes from ø4 to ø10 mm, and they are accompanied by a splicing manual for 3-strand ropes.</p>
<h2>Detailed characteristics of the Set of 4 Hollow Needles to splice by Euromarine</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Euromarine's boxwood capillary sail furler</h2>
<div class="fiche-txt">It is a white polyester braid of 6 mm diameter. It has a stainless steel staple. It will be perfect for storing and tying your sail.</div>
<h2>Characteristics of the Euromarine boxwood capillary sail furling system</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The Globe 5000 halyard from FSE ROBLINE 5m</h2>
<div class="fiche-txt">It is mainly intended for use where minimum stretch and low weight are required. Its core is made of Dyneema SK78, it is covered by polyester 32. This allows the halyard to have an excellent cohesion between its sheath and its core so they will not slip between them. This rope can also be used unsheathed. It measures 5 meters.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the Globe 5000 halyard from FSE ROBLINE</h2>
</div>
unavailable
• 
