available
Detailed features
This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.
- Sheave diameter: 22mm
- Maximum rope diameter: 6 mm
- Mounting: 5 RH mm
- Hole spacing: 52 mm
- Length: 64 mm
- Weight : 21 g
- Maximum working load: 91 kg
- Breaking load: 544 kg
In the same category
4 other products seleted for you-
<p style="text-align:justify;">This model is the first without rivets or metal shackles, this T2 carbo pulley is ultra-resistant and made of composite materials.</p>
<p class="PIN_1373379577617_hazClick" style="text-align:justify;">It is ideal when used for trimming cars, mainsheet or vang sheets, building stepped hoists or crow's feet and any other system requiring the use of light blocks</p>
<p class="PIN_1373379577617_hazClick" style="text-align:justify;">The removable loop is inserted into the head of the pulley, then passed around the fixed point for a perfect hold. Product supplied with Dyneema loop.</p>
available
-
<div class="fiche-txt">
<h2>Wichard's friction ring</h2>
<div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the Wichard FRX friction ring</h2>
</div>
available
-
<p>This bullet pulley has a low coefficient of friction for guiding bumps to the rear. It is compact and lightweight, with fast engagement and release under high or light loads.</p>
available
-
<p style="text-align:justify;">This block is one of Harken's smallest blocks. It is ideal for small synthetic fiber tuning lines on Hi-Tech dinghies. It features a patented bearing system that uses stainless steel balls captured in a groove</p>
available
• 
