available
€56.05 -20% €44.84 Tax included
error
Shipped according to supplier's deadline
Une question ?
+33 2 97 11 80 95
Detailed features
Plastimo Hammar refill kit for MA1 inflatable vest
Refill kit for Pilot 150-165, EVO 165, Quickfit 150 with automatic percussion, Hammar hydrostatic system. With MA1 percussion head. Designed for easy maintenance of your inflatable vest. The kit contains a 33g CO2 gas cylinder, a hydrostatic release with manual pull cord and a key.
Detailed features of the Hammar MA1 refill kit
- Hammar Standard MA1
- Available in 150N or 275N
- 150N = 33g
- 275N = 60g
- Suitable for Pilot vests
- Must be replaced every 4-5 years
- Supplier Plastimo
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>4Water Fluorescein colouring powder</h2>
<div align="justify">
<div class="fiche-txt">This powder is fluorescent yellow-green, it becomes phosphorescent green when it comes into contact with water. It will allow you to be easily spotted. It is presented in an orange waterproof bag. The release of the powder is very simple: you just have to release the protective strip located on the bag. It dilutes for 8 to 12 hours and remains visible for several hours after immersion.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of 4Water Fluorescein colouring powder</h2>
</div>
</div>
available
-
<h2 style="text-align:justify;">Lifelines 9m long : </h2>
<p style="text-align:justify;">Lifelines to be fitted flat to the deck. Flat 25 mm webbing, does not roll under feet. Sold in pack of 2 lifelines. Beaking load : 2400 daN</p>
<h2 style="text-align:justify;">Caracteristics of the lifelines 9m long :</h2>
available
-
available
-
<div class="fiche-txt">
<h2>PROSENSOR 4 Water trigger</h2>
<p><span>Trigger cylinder for the replacement of the UML PROSENSOR automatic firing pin. Compatible with 33gr CO2 cartridges, for 4W Prosensor automatic vests. Trigger only, sold without cartridge</span></p>
<p></p>
</div>
available
• 
