available
Detailed features
A protective hood to protect you from the sea spray
This hood will protect your face from sea water splashes that can be uncomfortable to breathe and will make you more visible. It is placed over the head and the vest.Detailed features of the Crewsaver CrewFit 180N PRO vest hood
- Compatible with the Crewsaver CrewFit 180N PRO vest
- Storage inside your vest
- Makes you more visible to the emergency services
- Protects the face from sea water splashes
- Fits over the head and vest
You might also like 2 other products seleted for you
-
<div class="fiche-txt">
<h2>A flashlight for life jackets : Compulsory equipment when boating</h2>
<p>This flashing light complies with the current boat safety standards (division 240) so that you can be seen in an emergency situation. Designed to be integrated into the CrewSaver lifejackets, it is activated by contact with water in the event of a fall into the water and the opening of the lifejacket. Integrated as standard in the Ergofit Crewsaver range, it can be added as an option on tious other lifejackets.</p>
<h2>Features of the Crewsaver flashlight</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Reload your UML automatic firing pin vest with this reset kit</h2>
<p>These recharging kits, which include a CO2 refill and a black cellulose capsule, will allow you to refill your UML automatic firing lifejacket.</p>
<h2>Which kit to choose according to your Crewsaver vest ?</h2>
<ul>
<li>23g for Crewfit Junior 150N vests</li>
<li>33g for Crewfit 165N Sport Vests</li>
<li>38g for 180N and 190N vests</li>
<li>60g for 290N vests</li>
</ul>
<h2>Features of the UML Crewsaver automatic reset kit</h2>
</div>
available
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Switch your Deckvest Spinlock vest to Manual mode!</h2>
<p>For water sports enthusiasts such as Jet Ski, Wake or Kayak, an automatic vest is not suitable because it would be triggered too easily when in contact with water. For this use, Spinlock recommends the use of this kit to switch your Deckvest Pro Sensor Elite vest to manual mode. Installed in a few minutes, this cap allows you to deactivate your UML firing pin so that you can dive into the water without risking the inflation of your vest.</p>
<h2>Spinlock, boat safety is not a luxury</h2>
<p>The English brand develops and produces safety accessories for the professional and amateur sailor with reference products such as the Deckvest 5D, the rolls of the offshore lifejacket, integrating the harness, a flash light, an eye cutter and a retractable anti-spray hood. Essential for the equipment of professional sailors, it is also the choice of demanding boaters in terms of safety at sea.</p>
</div>
available
-
<p>Refill kit consisting of a 33 gr 150N adult CO2 cartridge and the Hammar trigger. This standard kit is perfectly suited for the Hammar 150N FORMULA waistcoat.</p>
available
-
<div class="fiche-txt">
<h2>4Water Fluorescein colouring powder</h2>
<div align="justify">
<div class="fiche-txt">This powder is fluorescent yellow-green, it becomes phosphorescent green when it comes into contact with water. It will allow you to be easily spotted. It is presented in an orange waterproof bag. The release of the powder is very simple: you just have to release the protective strip located on the bag. It dilutes for 8 to 12 hours and remains visible for several hours after immersion.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of 4Water Fluorescein colouring powder</h2>
</div>
</div>
available
-
<div class="fiche-txt">
<h2>CO2 Refill for Restube Basic, Classic and Sport</h2>
<p>In this refill kit, 2 CO2 refill cartridges compatible for the RESTUBE Basic, Classic and Sport.</p>
<h2>Features of the CO2 Refill for Restube Security System</h2>
</div>
unavailable
• 
