available
Detailed features
CO2 Refill for Restube Basic, Classic and Sport
In this refill kit, 2 CO2 refill cartridges compatible for the RESTUBE Basic, Classic and Sport.
Features of the CO2 Refill for Restube Security System
- 2 pieces of original RESTUBEcartridge
- 2 pieces safety clip green
- Conforms to DIN EN ISO 12402-7
- seawater resistant
- 16 gr
- Stainless steel CO2 refill for Restube basic, classic and sports
In the same category
4 other products seleted for you-
<h2>Plastimo Hammar refill kit for MA1 inflatable vest</h2>
<p><span>Refill kit for Pilot 150-165, EVO 165, Quickfit 150 with automatic percussion, Hammar hydrostatic system. With MA1 percussion head. Designed for easy maintenance of your inflatable vest.</span><span> The kit </span>contains a 33g CO2 gas cylinder, a hydrostatic release with manual pull cord and a key.</p>
<h2>Detailed features of the Hammar MA1 refill kit</h2>
available
-
<div class="fiche-txt">
<h2>A survival knife to put in your vest in case of emergency</h2>
<p>This knife, practical to carry with you, will allow you to quickly cut the ropes in an emergency situation. The belt cover is included with the knife for easy attachment to the life jacket.</p>
<h2>Features of the Crewsaver ErgoFit survival knife</h2>
</div>
available
-
<div class="fiche-txt">
<h2>4Water Fluorescein colouring powder</h2>
<div align="justify">
<div class="fiche-txt">This powder is fluorescent yellow-green, it becomes phosphorescent green when it comes into contact with water. It will allow you to be easily spotted. It is presented in an orange waterproof bag. The release of the powder is very simple: you just have to release the protective strip located on the bag. It dilutes for 8 to 12 hours and remains visible for several hours after immersion.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of 4Water Fluorescein colouring powder</h2>
</div>
</div>
available
-
<div class="fiche-txt">
<h2>Switch your Deckvest Spinlock Lifejacket to Manual mode!</h2>
<p>For water sports such as Jet Ski, Wake or Kayak, an automatic vest is not suitable because it would be triggered too easily when in contact with water. For this use, Spinlock recommends the use of this kit to switch your Deckvest UML or Deckvest Lite vest to Manual mode. Installed in a few minutes, this cap allows you to deactivate your UML firing pin so that you can dive into the water without the risk of triggering the inflation of your vest.</p>
<h2>Spinlock Deckware series, boat safety is not a luxury</h2>
<p>The English brand develops and produces safety accessories for the professional and amateur sailor with reference products such as the deckvest 5D, the rolls of the offshore lifejacket, integrating the harness, a flash light, an eye cutter, a retractable anti-spray hood. Essential for the equipment of professional sailors, it is also the choice of demanding boaters in terms of safety at sea.</p>
</div>
available
• 
