available
Detailed features
Refill cartridge for 150N self-inflating lifejacket
Cartridge for recharging lifejackets with manual or automatic release. Capacity of 33g allowing a buoyancy of 150N. Suitable for self-inflating lifejackets with manual or automatic release 150N for adults.
Description of the refill cartridge 150N self-inflating lifejacket
- 33 gram CO2 cartridge, suitable for 150N adult waistcoats
- Used to rearm a manual release self-inflating lifejacket.
- Screws onto the manual release system of self-inflating lifejackets
- The same cartridge can be used for self-inflating lifejackets. Please note that for self-inflating lifejackets (UML) it is also necessary to replace the trigger.
You might also like 1 other product seleted for you
-
<h2>Plastimo Typhoon 150 N Vest</h2>
<p><span style="text-align:justify;">150N vest for pleasure craft. Designed to be worn intensively, abrasion and tear resistant. PE foam. Buoyancy: 150N. Chest size: max 120 cm. Available with or without individual markings.</span></p>
<ul>
<li>30 - 50 kg Size S</li>
<li>50 - 70 kg Size M</li>
<li>70 - 90 kg Size L</li>
<li>+ 90 Kg Size XL</li>
</ul>
<p></p>
<h2>Characteristics of the Typhoon 150 N Vest from Plastimo</h2>
available
In the same category
4 other products seleted for you-
<h2>Refill kit UML Automatic 4W Lifejacket 150N Child</h2>
<p>Refill kit consisting of a 24 gr CO2 cartridge 150N Child and the UML trigger. This standard kit is ideally suited to any 4W Child 150N Automatic Lifejacket using the UML firing pin with a 24 gram CO2 cartridge (or 4water Jumpy 150N Automatic Lifejacket)</p>
<h2>Description of the UML 4W Automatic Lifejacket 150N Child Refill Kit</h2>
available
-
<div class="fiche-txt">
<h2>PROSENSOR Elite Trigger</h2>
<p><span>Trigger cylinder for the replacement of the UML PROSENSOR ELITE automatic firing pin. Compatible with 33gr CO2 cartridges, for 4W Prosensor Elite automatic vests.</span></p>
<p></p>
</div>
available
-
<h2 style="text-align:justify;">The 4WATER 3-point elastic lanyard with indicators</h2>
<p style="text-align:justify;">3-point elastic lanyard to be connected to the boat's lifeline whatever manoeuvres one may make on board the boat, especially when the weather turns bad.</p>
available
-
<h2>Plastimo Hammar refill kit for MA1 inflatable vest</h2>
<p><span>Refill kit for Pilot 150-165, EVO 165, Quickfit 150 with automatic percussion, Hammar hydrostatic system. With MA1 percussion head. Designed for easy maintenance of your inflatable vest.</span><span> The kit </span>contains a 33g CO2 gas cylinder, a hydrostatic release with manual pull cord and a key.</p>
<h2>Detailed features of the Hammar MA1 refill kit</h2>
available
• 
