available
Detailed features
PROSENSOR Elite Trigger
Trigger cylinder for the replacement of the UML PROSENSOR ELITE automatic firing pin. Compatible with 33gr CO2 cartridges, for 4W Prosensor Elite automatic vests.
- Replacement Prosensor Elite trigger, to be screwed onto the firing pin.
You might also like 1 other product seleted for you
-
<div class="fiche-txt">
<h2>A FlashLight to be integrated in the lifejacket!</h2>
<p>This heavy-duty, compact lamp can be clipped onto a strap of <strong>automatic lifejacket</strong> and is triggered by contact with water in the event of a fall into the sea. The flashes generated by this flashlight are visible for several kilometers around and this for a duration of 12 hours. This significantly increases the chances of survival in the event of an accident. The extra flat dome of the lamp and the tamper-proof clip make it very resistant also during rescue operations. Can be turned off manually once triggered. Fits all types of straps (vests, wetsuits, survival suits) up to 40mm wide.</p>
<h2>Find all the safety equipment for the boat on Picksea.com</h2>
<p>Life jackets, lanyards, harnesses, regulatory and mandatory equipment on board a boat, find the Picksea selection of the best products for safety equipment on our accessories and safety at sea area. Ask our team for advice on 02 85 52 65 01</p>
<h2>Detailed characteristics of the lamp Flash Auto W4 Dianiamant Solas</h2>
</div>
available
In the same category
4 other products seleted for you-
<h2><span>Elastic lanyards with 3 stainless steel clip with double security and automatic closing</span></h2>
<p>Aluminium 3 clips lanyard with double safety lever and load indicator, designed to allow quick opening in a single movement. Flexible, elastic polyester webbing with retro-reflective thread for easy night-time identification. Length 1m flat lanyard + 1m lanyard extendable to 1.5m. Supplied in a mesh storage bag. </p>
<p>Load indicator: When the lanyard is subjected to a very high load (e.g. during a fall into the water), a load indicator comes off and a label appears indicating that the lanyard must be replaced.</p>
<h2><span>Characteristics of the lanyard with 3 clip :</span></h2>
available
-
<div class="fiche-txt">
<h2>A reset kit for Hammar MA1 trigger vests</h2>
<p>Refill your Hammar MA1 hydrostatic release vest with this refill kit.</p>
<p>Compatible with the Crewsaver Ergofit 190N and 290N vests.</p>
<ul>
<li>Ergofit 190N vest: 38g capsule</li>
<li>Ergofit 290N Vest: 60g capsule</li>
</ul>
<h2>Features of the Hammar MA1 Crewsaver hydrostatic reset kit</h2>
</div>
available
-
<h2>Refill cartridge for 150N self-inflating lifejacket</h2>
<p>Cartridge for recharging lifejackets with manual or automatic release. Capacity of 33g allowing a buoyancy of 150N. Suitable for self-inflating lifejackets with manual or automatic release 150N for adults. </p>
<h2>Description of the refill cartridge 150N self-inflating lifejacket</h2>
available
-
<h2>The ALTO 75N Lifebelt Refill Cartridge</h2>
<p>Kit with 2 x 16g gr 75N CO2 cartridges to fit the ALTO Lifebelt.</p>
<h2>Characteristics of the ALTO Lifebelt </h2>
available
• 
