available
€72.00 Tax included
check_circle
In stock
-
Livraison en points relais : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
The Harken ESP sheaves, with their simpler design, complete the current range of sheaves. The sheave shaft is mounted on bearings to withstand high static loads.
This range of blocks offers an ideal solution for halyards, reefing lines, backstay hoists.
- Sheave diameter : 40 mm
- Maximum rope diameter : 12 mm
- Fixation : 4 FH, 8 FH mm
- B : 39 mm
- C : 40 mm
- Maximum workload : 567 kg
- Breaking load : 907 kg
- Length: 65.5 mm
- Weight: 50 g
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Wichard's friction ring</h2>
<div class="fiche-txt">This ring combines performance, lightness and reliability. It is very resistant and can be used under heavy loads or with low traffic. It allows a good circulation of the ropes while limiting the wear of the latter.</div>
<div class="fiche-txt"></div>
<h2>Detailed characteristics of the Wichard FRX friction ring</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan 20mm Single Orbit Pulley with Lashing</h2>
<div class="fiche-txt">No metal elements in these Orbit pulleys, everything is made of high tech polymer resin capable of supporting high loads. The special feature of the Orbit blocks is also the optimization of the ball track which frees up the central part of the block hub, thus limiting the weight and allowing the lashing to pass through the dyneema garcette. The 20 Orbit series can only be used on dinghy and catamaran trimmers up to 5 meters. Very light and able to support a working load of 250 kilos for a break of 550 kilios for a weight of 9 grams, it is one of the most performing blocks in its category.</div>
<div class="fiche-txt"></div>
<h2>Features of the Ronstan RF25109 Orbit 20mm Single Pulley with Lashing</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Harken T2 Block Carbo Pulley:</h2>
<p>This Harken model has no metal rivets or shackles, the heavy-duty Carbo T2 tackle block is made of composite materials. The version or double can be attached by knotted or spliced transfers to almost any element. These blocks can be used to adjust cars, mainsheet or vang sheets, to create stepped hoists or bridle systems and any other system that requires lightweight blocks.</p>
</div>
<h2>Detailed characteristics of the pulley</h2>
available
-
<p>This bullet pulley has a low coefficient of friction for guiding bumps to the rear. It is compact and lightweight, with fast engagement and release under high or light loads.</p>
available
• 
