available
Detailed features
The 16 mm pulley is the smallest of the brand Harken. This one is ideal for small adjustments made of synthetic fibres. The pulley has a rolling system which uses stainless steel balls and an O-ring to hold the tip in the sheave between intermittent loads.
| Sheave diameter | Maximum rope diameter | Length | Weight | Maximum workload | Breaking load | |
| Simple | 16 mm | 5 mm | 38 mm | 12 g | 113 kg | 544 kg |
| Double | 16 mm | 5 mm | 54 mm | 28 g | 204 kg | 544 kg |
| Triple | 16 mm | 5 mm | 57 mm | 43 g | 318 kg | 544 kg |
In the same category
4 other products seleted for you-
<p>This Harken pulley has a low coefficient of friction and is compact and lightweight. It is therefore ideal for windsurfers and dinghies or for low load trimming bumps.</p>
available
-
<div class="fiche-txt">
<h2>WICHARD triple pulleys for 8-9 mm rope</h2>
<div class="fiche-txt">These pulleys are suitable for heavy loads and static manoeuvres. The 45 sheave rotates around the stainless steel shaft and is protected by the flanges. The universal head of these pulleys allows a wide choice of attachments. Available with or without balls. Without balls, they are perfect for mainsail hoists, halyards, boom vang, spinnaker sheets for sport catamarans and small keelboats. With balls, they have two rows of lateral balls, which gives them a very good performance under light load. Under high load, the forces are taken up by the stainless steel shaft without lateral friction. You can use them for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD triple pulleys for 8-9 mm rope</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan RF8081 Shock XL Pulley</h2>
<div class="fiche-txt">This pulley combines performance and versatility. It is ultra light and ultra compact. It is shock resistant and has a high load capacity.</div>
<div class="fiche-txt"></div>
<h2>Ronstan RF8081 Shock XL pulley features</h2>
</div>
available
-
<div class="fich-txt">
<h2>The WICHARD single pulley for 8-9 mm rope</h2>
<div class="fich-txt">This pulley is available in different versions with or without balls. Its universal head will allow a wide choice of fixations. It has an excellent resistance to heavy loads. The sheave is protected by the flanges. With balls, you can use it for mainsheet and track, spinnaker sheets and arms, genoa sheets and backstays. Without balls, you can use it for mainsheet hoists, halyards, boom vang and spinnaker sheets for sport catamarans and small keelboats. The fittings are in 316L stainless steel, the flanges in polycarbonate and the sheave in composite.</div>
<div class="fich-txt"></div>
<h2>The characteristics of the WICHARD single pulley for 8-9 mm rope</h2>
</div>
available
• 
