available
Visibility kit for Kayak | Picksea Online only
  • Visibility kit for Kayak | Picksea
  • Visibility kit for Kayak | Picksea
  • Visibility kit for Kayak | Picksea
  • Visibility kit for Kayak | Picksea
  • Visibility kit for Kayak | Picksea

Visibility kit for Kayak

See detailed specifications

€119.10 Tax included

error Shipped according to supplier's deadline
  • Livraison en points relais : Gratuit

Une question ? +33 2 97 11 80 95

Une question ? +33 2 97 11 80 95

Detailed features

A visibility kit for Kayak of the brand Railblaza

Be safe, be seen!

The RAILBLAZA Visibility Kit II is a must-have safety item for any kayak angler or recreational paddler. Get everything you need to see your kayak or canoe/kayak day and night on the water.

Simply mount the StarPort HD with the supplied brackets, lock the 1 metre (3') Extenda Pole 1000, attach it to the fluorescent orange flag for daytime visibility and lock the Illuminate i360 - White navigation light all the way around in the upper port for safety and night time compliance.
When you're done, disassembly is quick and easy, and it can be stored just about anywhere.
The i360 light can also be fitted to other RAILBLAZA ports around the kayak and the Extenda Pole 1000 can be used to display a national or dive flag, or combined with RAILBLAZA camera mounts.
Designed and manufactured in New Zealand using high quality materials and the latest LED technology

Detailed features of the Railblaza visibility kit

3 operating modes

  • 2NM full brightness navigation mode - up to 25 hours battery life
  • Low light working mode - up to 160 hours of battery life
  • Flashing emergency mode - over 200 hours of battery life
  • Waterproof to 1 meter
  • Floats with a clear lens
  • Powered by 3 AA batteries, not included
  • Complies with USCG 2NM 33 CFR 183.810 and ABYC A-16
  • Independently tested by Imanna Labs Inc, Florida
  • Supplied with StarPort HD, but suitable for any other RAILBLAZA mounting port, ordered separately.
  • Size of Flouro safety flag: 450 mm (18 inches) x 200 mm (8 inches)

RAILBLAZA 3 pieces Extenda Pole can be configured as;
1 section height 380mm (15 ")
2 sections height 680mm (27 ")
3 sections height 980mm (38.5 ")

In the same category

4 other products seleted for you
  • <h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2> <p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p> <h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
    unavailable
  • <h2>The adhesive tray Quickport is suitable for pneumatic supports</h2> <p><span>It is made of high quality plastic. <span>Mounting rod holders and other accessories on inflatable and pneumatic boats is even easier. </span></span>It features an accessory "lock" system and is compatible with many surfaces and the majority of Rail Blaza accessories. The new 3M VHB pad allows you to peel and stick the holder and then fit it to your favorite RAILBLAZA accessories such as your rod holder, storage bin, diving horn or many other Railblaza accessories.</p> <h2>Detailed characteristics of the Quickpoert receiver from Railblaza</h2>
    available
  • <h2>A rotating platform allowing to fix most of the sounders</h2> <p>This platform for mounting depth finders or chartplotters with U-shaped brackets, making them easily removable. Once removed, all that remains on the deck is a low-profile RAILBLAZA receiver.<br /><br />This 3-axis mount features friction joints at the top and bottom with lockable R-Lock joints (pat on hold). The center joint is fully adjustable in 15 degree increments. Will take fish finders up to 1.5 kg. Mount on inclined surfaces and adjust your screen!</p> <h2>Detailed features of the Fish Finder receiver from Railblaza</h2>
    unavailable
  • <div class="fiche-txt"> <h2>Sit on top kayak thigh straps for more comfort</h2> <p>Use these thigh braces for greater comfort and performance! <span>Ergonomic and adjustable, they fit all self-draining models with loop bridges.</span></p> <h2>Detailed features of the RTMsit-on-top thigh straps</h2> </div>
    available