available
Detailed features
The Railblaza whip pole is ideal to be seen and followed during your excursions.
Light, mobile and flexible, ideal for kayaks, mountain bikes, anywhere you need to be seen. The mast is supplied with a 300x150 mm flag. Once mounted it measures 1.20m. It can also be used as a mast for other flags such as those needed for diving or water sports (wakeboard, ski...).
The characteristics of the Railblaza whipping mast
- Increases visual presence on the water or farm
- Delivered with a 300 x 150 mm flag
- Easily dismantled for transport
- adaptable to other pennants by rolling up the fixed one (orange) and fixing the new one on top
In the same category
4 other products seleted for you-
<h2>A rail-mounted system for SidePort® receivers</h2>
<p>Fast and versatile with the SidePort, this rail mounting system allows you to quickly move and secure the SideMount along the aluminum rail of your boat.</p>
<h2>Detailed features of the Railblaza Tracloader</h2>
unavailable
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p>
<h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
unavailable
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Turn 2 StarPorts into 4 with this sturdy and convenient rail system. StarPorts can be loosened and slid to fit the right position.<br /><br />Once installed, simply clip on your RAILBLAZA accessories and then remove the system when you are finished with your security, transportation or storage tasks!<br /><br />The TracPort Dash 500 comes with 4 StarPorts, 2 StarPort adapters, a filler extrusion and all the necessary fasteners to install and cut the rail.<br /><br />We also offer a shorter TracPort Dash 350.</p>
<h2>Detailed characteristics of the Tracport receiver from Railblaza</h2>
available
-
<h2>An extension to extend the distance of the Starport receiver</h2>
<p>This accessory allows you to raise the hanging point of your starport receiver.</p>
available
• 
