available
Detailed features
This range of Harken blocks are compact, lightweight and have a low coefficient of friction. They are therefore ideal for sailboards and dinghies or for low load trimming bumps on boats of all sizes.
- Sheave diameter: 22 mm
- Shackle diameter: 5 mm
- Maximum rope diameter: 6 mm
- Length: 102 mm
- Weight : 57 g
- Maximum working load: 159 kg
- Breaking load: 544 kg
In the same category
4 other products seleted for you-
<p>Like the other models in the same range, this pulley is ideal for small synthetic fibre ropes. It has a patented bearing system that uses stainless steel balls.</p>
<p>The 467 pulley is equipped with a narrow sheave for extremely fine adjustment bumps.</p>
available
-
<div class="fiche-txt">
<h2>Ronstan 20mm Single Orbit Pulley with Lashing</h2>
<div class="fiche-txt">No metal elements in these Orbit pulleys, everything is made of high tech polymer resin capable of supporting high loads. The special feature of the Orbit blocks is also the optimization of the ball track which frees up the central part of the block hub, thus limiting the weight and allowing the lashing to pass through the dyneema garcette. The 20 Orbit series can only be used on dinghy and catamaran trimmers up to 5 meters. Very light and able to support a working load of 250 kilos for a break of 550 kilios for a weight of 9 grams, it is one of the most performing blocks in its category.</div>
<div class="fiche-txt"></div>
<h2>Features of the Ronstan RF25109 Orbit 20mm Single Pulley with Lashing</h2>
</div>
available
-
<div class="fiche-txt">
<h2>WICHARD triple pulleys for 8-9 mm rope</h2>
<div class="fiche-txt">These pulleys are suitable for heavy loads and static manoeuvres. The 45 sheave rotates around the stainless steel shaft and is protected by the flanges. The universal head of these pulleys allows a wide choice of attachments. Available with or without balls. Without balls, they are perfect for mainsail hoists, halyards, boom vang, spinnaker sheets for sport catamarans and small keelboats. With balls, they have two rows of lateral balls, which gives them a very good performance under light load. Under high load, the forces are taken up by the stainless steel shaft without lateral friction. You can use them for mainsheet and sheet track, spinnaker sheets and arms, genoa sheets and backstays.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the WICHARD triple pulleys for 8-9 mm rope</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan 30mm Single Orbit Pulley with Lashing Head</h2>
<div class="fiche-txt">No metal parts in these Orbit pulleys, except for the stainless steel ball bearings, everything is made of high-tech polymer resin capable of withstanding heavy loads. The special feature of the Orbit blocks is also the optimization of the ball track, which frees up the central part of the block hub, thus limiting the weight and allowing the passage of lashing or dyneema link. The 30 Orbit series is used on mainsail and spinnaker sheets for dinghies, catamarans and sport keelboats up to 5 meters. Very light and with a working load of 300 kilos for a break of 600 kilios for a weight of 22 grams, it is one of the most performing blocks in its category.</div>
<div class="fiche-txt"></div>
<h2>Features of the Orbit 30mm Lashing Head Ronstan RF35101 single pulley</h2>
</div>
available
• 
