available
Detailed features
The International HT55 pump
This pump is suitable for Epiglass HT9000 epoxy resin. The HT55 pump is calibrated to deliver the perfect mixing ratio of base and hardener in a single stroke.
Features of the International HT55 pump
- Kit 2 pumps for 3,75L
In the same category
4 other products seleted for you-
<h2>Mooring protection</h2>
<p>Plastimo's Spiroll Mooring Protection is a clever sleeve that wraps around the friction areas of your mooring lines to protect them from premature wear and tear and also to reduce noise in the mooring cleats. Easy to install and remove thanks to its roll-up system.</p>
<h2>Detailed characteristics of the mooring line holder</h2>
available
-
<div class="fiche-txt">
<h2>The International HT80 pump</h2>
<div class="fiche-txt">This pump is suitable for the Boatyard pack. It allows an excellent mixing ratio between the base and the hardener.</div>
<div class="fiche-txt"></div>
<h2>Features of the International HT80 pump</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Interior Finish 750 from International</h2>
<div class="fiche-txt">This product will allow you to make high quality polyurethane finishes in interior. Its finishes are very shiny and very opaque. Very easy to clean, it will offer you a very good resistance to chemical aggressions.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Interior Finish 750</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Matrix Dure antifouling for sailors and motorboats</h2>
<div class="fiche-txt">Ideal for use in fresh and salt water. Effective, its finish is smooth and smooth, it can be sanded for a better glide. The VC OFFSHORE EU antifouling is perfect for fast racing boats.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div>
</div>
<div class="fiche-txt"></div>
<h2>Features of International OFFSHORE EU PVC Antifouling</h2>
</div>
unavailable