available
Detailed features
Matt Chem's Proplast protective plastic film
It will leave a resistant, transparent and flexible plasticized film on the treated supports. It resists to external aggressions due to a sulphurous atmosphere, chlorinated waters, oils, saline mists, ... It will protect and give a new aspect to surfaces, engines, hoses, cables, stainless steel, anodized aluminium, ...
The characteristics of Matt Chem's Proplast protective plastic film
- Dielectric strength over 100,000 V per mm
- Laminates documents and charts
- Spray in 2 crossed layers at 20 cm from the support
- Packaging : Aerosom of 150 ml
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>The epiglass Boatyard base of International</h2>
<div class="fiche-txt">This product serves as a base.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the epiglass Boatyard base of International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Self-adhesive dacron to repair your sail</h2>
This roll of self-adhesive dacron is multi-purpose and will allow you to make some repairs on your kite sail or other.<br /><div class="fiche-txt"></div>
<h2>Features of Dr.Tuba's self-adhesive dacron</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Matt Chem's Bactofor Bilge Water Sanitiser</h2>
<div class="fiche-txt">It will neutralize the proliferation of bad odors from bilge water on your boat. This sanitizer is odorant, it will provide a smell of eucalyptus.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of Matt Chem's Bactofor bilge water sanitiser</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The International HT55 pump</h2>
<div class="fiche-txt">This pump is suitable for Epiglass HT9000 epoxy resin. The HT55 pump is calibrated to deliver the perfect mixing ratio of base and hardener in a single stroke.</div>
<div class="fiche-txt"></div>
<h2>Features of the International HT55 pump</h2>
</div>
available
• 
