Detailed features
The Kitecleat is a smart accessory to make your life easier when kite-surfing!
With the Kitecleat from KiteSurfVoilier you will no longer need to untwist your lines before launching your kiteboard! No more wasting precious minutes trying to untangle your kite lines, this essential accessory allows you to leave them perfectly straight at each release, to find them perfectly aligned at the next launch! By wedging the 4 lines in its jaws and rolling up the rest, you can be sure that at the next session the unrolled lines will be perfectly clear and ready for take off. This gives a particularly interesting advantage when you want to take off from the stern of a sailboat: Connect your lines, let your kite drift away by unrolling the lines, and hop, immediate takeoff!
You can also easily check the length balance of your lines. Kitecleat Abs has been designed for simplicity and ease of use above all! Also, very light and compact, the Kitecleat is resistant to applied forces and the environment.
Features of the Kitecleat
- Maintaining the position of the lines
- Storage of line ends
- Locking in closed position
- Stainless steel materials only
- Float
You might also like 1 other product seleted for you
-
<div class="fiche-txt">
<h2>Harken Reflex 3/4 Sailing Gloves</h2>
<p>Reflex 3/4 high performance sailing gloves allow you to handle rope in all temperature and humidity conditions. The 3/4 fingers ensure that you don't lose the precision of touch.</p>
<h2>Boat gloves</h2>
<p>To find your boat gloves on the internet, visit Picksea! With many models and types of gloves: long, short, summer, winter... our website specialized in all nautical equipment allows you to choose the type of gloves you are looking for</p>
</div>
available
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Top underlay BIPOLY Magic Marine</h2>
<p>This BIPOLY top, fitted close to the body, combines the advantages of a 1st and 2nd layer: ultra-tight, breathable, it is light and soft to the touch for optimal comfort.</p>
<p>Magic Marine offers high quality equipment for board sports, dinghy and light sailing. Sailors looking for maximum protection and optimized comfort use them as an underlayer, to be worn under a full wetsuit.</p>
<p>A basic for all types of water sports. Ideal under a Long John, or under any type of full wetsuit, it can also be worn alone in summer.</p>
<h2>Detailed characteristics of the BIPOLY Lon John Magic Marine suit</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Magic Marine Boardshorts</h2>
<p>These board shorts are made of breathable 92% polyester fabric.% Polyester and 8% It is made of elastane and is therefore very quick drying. Designed with a tie at the waist that will allow you to tighten your shorts in the easiest way and hold them during the practice of your favorite water sport. Designed by Magic Marine for summer sailing in dinghies, sport catamarans, kite surfing or windsurfing. Available in two colours, these shorts are designed for regattas and cruising in good weather.</p>
<h2>Features of the Astern Boardshort from Magic Marine</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The Aquaterra knife with smooth blade</h2>
<p>The Wichard Aquaterra smooth blade knife is a designed knife with a blade lock that opens with one hand and is equipped with a lanyard. This Offshore knife is available in 3 colors.</p>
<h2>Detailed characteristics of the Wichard Aquaterra Knife with smooth blade</h2>
</div>
available
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p>
<h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
unavailable
• 
