available
Detailed features
Subcutaneous strap to clip on the Pilot 165 Plastimo lifejacket
Highly recommended: prevents the vest from riding up and makes swimming easier.
Polypropylene strap (width 25 mm) with a plastic buckle clip in front.
Subcutaneous strap suitable for the following vest models:
- PILOT 165
- PILOT 165 FISHING
- PILOT RACE
- PILOT PRO 180
- PILOT 275
- PILOT SEASHORE
- QUICKFIT
- EASYFIT
Characteristics of the Pilot Plastimo subcutaneous strap
- Strap made of polypropylene (width 25 mm) with a plastic clip in front.
You might also like 1 other product seleted for you
-
<div class="fiche-txt">
<h2>A flashlight for life jackets : Compulsory equipment when boating</h2>
<p>This flashing light complies with the current boat safety standards (division 240) so that you can be seen in an emergency situation. Designed to be integrated into the CrewSaver lifejackets, it is activated by contact with water in the event of a fall into the water and the opening of the lifejacket. Integrated as standard in the Ergofit Crewsaver range, it can be added as an option on tious other lifejackets.</p>
<h2>Features of the Crewsaver flashlight</h2>
</div>
available
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Plug for blocking the auto release of a self-inflating life jacket</h2>
<p>This accessory will allow you, once screwed on the UML prosensor or MK5 firing pin of your automatic lifejacket, to avoid the automatic activation of the lifejacket. This can be very useful either to store your lifejacket in a wet boat or to use the lifejacket while keeping the inflatable function but only in manual mode. With the UML release blocked, you can dive into the water, jet ski, wakeboard or do any other activity that is in constant contact with the water. Keep the manual release function safe for risky situations.</p>
</div>
available
-
<div class="fiche-txt">
<h2>Switch your Deckvest Spinlock Lifejacket to Manual mode!</h2>
<p>For water sports such as Jet Ski, Wake or Kayak, an automatic vest is not suitable because it would be triggered too easily when in contact with water. For this use, Spinlock recommends the use of this kit to switch your Deckvest UML or Deckvest Lite vest to Manual mode. Installed in a few minutes, this cap allows you to deactivate your UML firing pin so that you can dive into the water without the risk of triggering the inflation of your vest.</p>
<h2>Spinlock Deckware series, boat safety is not a luxury</h2>
<p>The English brand develops and produces safety accessories for the professional and amateur sailor with reference products such as the deckvest 5D, the rolls of the offshore lifejacket, integrating the harness, a flash light, an eye cutter, a retractable anti-spray hood. Essential for the equipment of professional sailors, it is also the choice of demanding boaters in terms of safety at sea.</p>
</div>
available
-
<h2>The ALTO 75N Lifebelt Refill Cartridge</h2>
<p>Kit with 2 x 16g gr 75N CO2 cartridges to fit the ALTO Lifebelt.</p>
<h2>Characteristics of the ALTO Lifebelt </h2>
available
-
<div class="fiche-txt">
<h2>PROSENSOR Elite Trigger</h2>
<p><span>Trigger cylinder for the replacement of the UML PROSENSOR ELITE automatic firing pin. Compatible with 33gr CO2 cartridges, for 4W Prosensor Elite automatic vests.</span></p>
<p></p>
</div>
available
• 
