unavailable
Detailed features
FSE ROBLINEOcean 300 XG mini reel
This rope is made of Dyneema SK78, which makes it very resistant and efficient. The colour is anthracite.
Characteristics of the FSE ROBLINEOcean 300 XG mini reel
| Diameter | 2 | 3 | 4 |
| Length | 25 m | 15 m | 10 m |
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Splicing needles of all sizes and for all purposes!</h2>
<p>This splicing needle is a rather rigid metal rod bent in two and ending with a fixed handle. It works in the opposite way to the hollow needle, in fact this one is used by pulling the needle and not by pushing it.</p>
<p><strong>XL Series</strong><span><span> fixed needles are also available in </span><span>long sizes (50 cm) for sizes F15, F20 and F25. </span><span>Those -</span><span>These are made for professional riggers.</span></span></p>
<h2>The different needle sizes and diameters</h2>
</div>
available
-
<h2>Mooring protection</h2>
<p>Plastimo's Spiroll Mooring Protection is a clever sleeve that wraps around the friction areas of your mooring lines to protect them from premature wear and tear and also to reduce noise in the mooring cleats. Easy to install and remove thanks to its roll-up system.</p>
<h2>Detailed characteristics of the mooring line holder</h2>
available
-
available
-
<div class="fiche-txt">
<h2>The D-Spicer kit to make your own dyneema splices and loops</h2>
<p>The <strong>D-Splicer</strong> is a reference tool for sailors, riggers and sportsmen who make their own splices and loops on modern ropes. The conventional technical limits of splitting with hollow needles are beginning to be reached, especially with Dyneema ropes under 4mm diameter, as these can become a real challenge to split for splicing.</p>
<p><span>The handle of the D-splicer is made of anodized aluminum, this type of aluminum is reinforced by a surface treatment which confers a corrosion resistance to him, as for its needle it is out of stainless steel to resist the wet and salty environment.</span></p>
<p>The D-Splicer is suitable for the finest ropes (<strong>less than 4mm</strong>) and in other situations where conventional needles would not work.</p>
<h2>Detailed features of the D-splicer kit</h2>
</div>
available
• 
