available
Double-sided adhesive on foam | Picksea
  • Double-sided adhesive on foam | Picksea

Double-sided adhesive on foam

See detailed specifications

€5.92 Tax included

check_circle In stock
Une question ? +33 2 97 11 80 95

Une question ? +33 2 97 11 80 95

Detailed features

Euromarine's double-sided adhesive on foam

It is a double-sided adhesive polyethylene foam. It has a high resistance to heat and solvents. Its removal is very easy and without trace. You can use it indoors as well as outdoors since this product is treated against UV. It can be used from -40°C to +120°C.

The characteristics of the double-sided adhesive on foam of Euromarine

  • Width: 20 mm
  • Thickness : 0.8 mm
  • Length : 5 m
  • Black
  • Use from -40°C to +120°C
  • Waterproof
  • Strong adhesion
  • Great tenacity
  • High resistance to heat and solvents

In the same category

4 other products seleted for you
  • <div class="fiche-txt"> <h2>The economical erodible antifouling that can be applied in one coat: Cruiser UNO EU</h2> <div class="fiche-txt">This economical antifouling allows you to do your refit in record time thanks to its high covering power and ease of application. It is suitable for motorboats going up to 25 knots and for sailing boats. It will be effective for one season in areas with average soiling. The application and the launching are very fast: 24 hours. Its environmental impact is reduced thanks to its low VOC content.</div> <div class="fiche-txt"><br /><div class="fiche-txt"><strong>Use biocidal products with care. Read the label and product information before use</strong></div> <div class="fiche-txt"></div> </div> <h2>Features of International Cruiser UNO EU Erodible Antifouling</h2> </div>
    unavailable
  • available
  • <div class="fiche-txt"> <h2>International Interfill 833 Coating</h2> <div class="fiche-txt">This finishing coat is easily sanded. It is sold in a kit containing a base and a hardener. The hardener can be standard or fast. Interfill 833 will give you a very smooth finish after sanding. It can be applied with a spatula, a coating knife or a ruler.</div> <div class="fiche-txt"></div> <h2>Features of International Interfill 833</h2> </div>
    unavailable
  • <div class="fiche-txt"> <h2>Matt Chem's Bactofor Bilge Water Sanitiser</h2> <div class="fiche-txt">It will neutralize the proliferation of bad odors from bilge water on your boat. This sanitizer is odorant, it will provide a smell of eucalyptus.</div> <div class="fiche-txt"></div> <h2>The characteristics of Matt Chem's Bactofor bilge water sanitiser</h2> </div>
    available
    Bactofor Bilge Cleaner
    MATT CHEM MARINE

    Bactofor Bilge Cleaner

    • €16.58
    Customize