unavailable
€384.50 Tax included
clear
Please call us +33 297 11 80 95
-
Livraison à domicile : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
Uni Pro EU Antifouling from International
This antifouling has been specially designed for sailboats and motorboats up to 25 knots and will provide all season protection. Ideal for medium to heavy soiling areas. With a low VOC content, it reduces the level of emissions and thus reduces its environmental impact.
Use biocidal products with care. Read the label and product information before use
Features of International Uni Pro EU Antifouling
- Not suitable for fast boats over 25 knots
- Finish: matte
- Compatible with the following substrates: Gelcoat, lead, steel, wood, carbon and cast iron
- Method of application: With a brush, with a roller, with an Airless gun or with an Airmix
- Number of coats: 1 to 2 coats
- Coverage: 4.7 m²/L for spray and airmix and 11.25 m²/L for roller and brush
- Dangerous. Observe the precautions for use.
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>A 100 % polish of McLube!</h2>
<p>This revolutionary fittings product is a lemon-based polish. McLube offers a 4 in 1 product: it cleans, polishes, protects and shines your boat hull. The quick and easy application will give your boat a new look in seconds. It also prevents mud from settling below the waterline.</p>
<h2>Picksea offers a wide selection of deck hardware products:</h2>
<p>Picksea, the number 1 in boating equipment, offers a selection of hardware products: boat maintenance, blocks, cleats, ropes and much more. Don't hesitate to contact our customer service by email or phone to get advice from our experts.</p>
</div>
<h2>Detailed characteristics of the polish</h2>
available
-
<div class="fiche-txt">
<h2>Boatyard epiglass hardener from International</h2>
<div class="fiche-txt">This product is used as a hardener. It is available in Standard or Rapid.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Boatyard epiglass hardener from International</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International No. 3 Thinner</h2>
<div class="fiche-txt">This thinner is used only for autifouling coatings and to facilitate the application of single component varnishes and finishes by spray.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the International No. 3 thinner</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Fibreglass surface Prep from International</h2>
<div class="fiche-txt">This product allows you to eliminate the waxes of mouldings, which will avoid you to sand the gelcoat before applying another product. It can also be used to prepare alkyd paints. Ideal for submerged areas.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the Fibreglass surface Prep by International</h2>
</div>
unavailable
• 
