available
Dielectric adhesive tapes 8000V | Picksea
  • Dielectric adhesive tapes 8000V | Picksea

Dielectric adhesive tapes 8000V

See detailed specifications

€2.00 Tax included

error Shipped according to supplier's deadline

Une question ? +33 2 97 11 80 95

Une question ? +33 2 97 11 80 95

Detailed features

Euromarine 8000V dielectric adhesive tapes

They will allow you to finish correctly and cleanly the electrical connections on your boat or on your motorhome. They protect the connectors from corrosion and are very good insulators.

The characteristics of Euromarine's 8000V dielectric adhesive tapes

  • Width: 19 mm
  • Length : 10 m
  • Colors: Red, Black, White

In the same category

4 other products seleted for you
  • <div class="fiche-txt"> <h2>International INTERPRIME 820 Epoxy Primer</h2> <div class="fiche-txt">This epoxy primer is a two-component primer that will offer you high performance. This primer is applicable on steel and on aluminium. Moreover, you can use it on both emerged and immersed areas. It will allow an excellent anticorrosive protection.</div> <div class="fiche-txt"></div> <h2>Characteristics of International INTERPRIME 820 epoxy primer</h2> </div>
    unavailable
  • <div class="fiche-txt"> <h2>The Gelshield Plus Kit from International</h2> <div class="fiche-txt">This epoxy primer is a non solvent based osmosis treatment. It is compatible with different substrates: fully cured polyester and epoxy coatings. Please note that this Gelshield Plus Kit should not be applied directly to the gelcoat.</div> <div class="fiche-txt"></div> <h2>Features of the Gelshield Plus Kit from International</h2> </div>
    unavailable
  • <div class="fiche-txt"> <h2>Euromarine Teflon type sealing tape</h2> <div class="fiche-txt">This tape will be perfect for sealing plumbing fittings in both boats and motor homes. Sold in 10 m reels.</div> <div class="fiche-txt"></div> <h2>The characteristics of the Euromarine Teflon type sealing tape</h2> </div>
    available
  • <div class="fiche-txt"> <h2>Fibreglass surface Prep from International</h2> <div class="fiche-txt">This product allows you to eliminate the waxes of mouldings, which will avoid you to sand the gelcoat before applying another product. It can also be used to prepare alkyd paints. Ideal for submerged areas.</div> <div class="fiche-txt"></div> <h2>The characteristics of the Fibreglass surface Prep by International</h2> </div>
    unavailable
    FIBREGLASS SURFACE PREP
    INTERNATIONAL

    FIBREGLASS SURFACE PREP

    • €79.00
    Customize