available
Protective plastic film Propl ast | Picksea
  • Protective plastic film Propl ast | Picksea

Protective plastic film Proplast

See detailed specifications

€19.70 Tax included

error Shipped according to supplier's deadline
Une question ? +33 2 97 11 80 95

Une question ? +33 2 97 11 80 95

Detailed features

Matt Chem's Proplast protective plastic film

It will leave a resistant, transparent and flexible plasticized film on the treated supports. It resists to external aggressions due to a sulphurous atmosphere, chlorinated waters, oils, saline mists, ... It will protect and give a new aspect to surfaces, engines, hoses, cables, stainless steel, anodized aluminium, ...

The characteristics of Matt Chem's Proplast protective plastic film

  • Dielectric strength over 100,000 V per mm
  • Laminates documents and charts
  • Spray in 2 crossed layers at 20 cm from the support
  • Packaging : Aerosom of 150 ml

In the same category

4 other products seleted for you
  • <div class="fiche-txt"> <h2>Masking tape 30mm width :</h2> <div class="fiche-txt">This is a strip of adhesive paper that will allow you to make clean paint and antifouling lines on your boat. For interior painting.</div> <div class="fiche-txt"></div> <h2>Characteristics of masking tapes 30 mm :</h2> </div>
    available
    Masking tapes 30 mm
    PLASTIMO

    Masking tapes 30 mm

    • €4.60
    • -15%
    • €3.91
    Customize
  • <div class="fiche-txt"> <h2>Matt Chem's bilge and engine cleaner</h2> <div class="fiche-txt">It is an emulsifiable liquid in aqueous phase, it favours the elimination of accidental oil and hydrocarbon spills that cannot be collected. It will perfectly eliminate mineral and crude oils.</div> <div class="fiche-txt"></div> <h2>Characteristics of Matt Chem's bilge and engine cleaner</h2> </div>
    available
    Bilge and engine cleaner
    MATT CHEM MARINE

    Bilge and engine cleaner

    • €24.50
    Customize
  • <div> <h2>INTERFILL 830 epoxy coating from International</h2> <div>This coating is the best possible choice for profiling steel or aluminium hulls and areas in the water or underwater. It is a two component, light grey colour. It is very hard and impact resistant. It is very easy to sand and it will provide you with a waterproofing.</div> <div></div> <h2>Characteristics of International INTERFILL 830 epoxy coating</h2> </div>
    unavailable
  • <div class="fiche-txt"> <h2>Matt Chem's SELECT HT Dielectric Degreasing Solvent</h2> <div class="fiche-txt">It has been specially designed and formulated for electronic and electrical equipment. It will allow you to dissolve oils, greases and all carbon deposits on the contacts. It evaporates relatively quickly and leaves no residue. It will not attack plastic materials.</div> <div class="fiche-txt"></div> <h2>The characteristics of Matt Chem's SELECT HT dielectric degreasing solvent</h2> </div>
    unavailable