available
Detailed features
Reset kit for Spinlock Deckvest UML 150N lifejacket
Specifically designed for Spinlock's DECKVEST UML 150N automatic lifejacket
In the same category
4 other products seleted for you-
<h2 style="text-align:justify;">Lifelines 11m long</h2>
<p style="text-align:justify;">Lifelines to be fitted flat to the deck. Flat 25 mm webbing, does not roll under feet. Sold in pack of 2 lifelines. Beaking load : 2400 daN</p>
<h2 style="text-align:justify;">Caracteristics of the lifelines 11m long</h2>
available
-
<h2 style="text-align:justify;">Lifelines 10m long : </h2>
<p style="text-align:justify;">Lifelines to be fitted flat to the deck. Flat 25 mm webbing, does not roll under feet. Sold in pack of 2 lifelines. Beaking load : 2400 daN</p>
<h2 style="text-align:justify;">Caracteristics of the lifelines 10m long :</h2>
available
-
<div class="fiche-txt">
<h2>A flashlight for life jackets : Compulsory equipment when boating</h2>
<p>This flashing light complies with the current boat safety standards (division 240) so that you can be seen in an emergency situation. Designed to be integrated into the CrewSaver lifejackets, it is activated by contact with water in the event of a fall into the water and the opening of the lifejacket. Integrated as standard in the Ergofit Crewsaver range, it can be added as an option on tious other lifejackets.</p>
<h2>Features of the Crewsaver flashlight</h2>
</div>
available
-
<h2>Plastimo Hammar refill kit for MA1 inflatable vest</h2>
<p><span>Refill kit for Pilot 150-165, EVO 165, Quickfit 150 with automatic percussion, Hammar hydrostatic system. With MA1 percussion head. Designed for easy maintenance of your inflatable vest.</span><span> The kit </span>contains a 33g CO2 gas cylinder, a hydrostatic release with manual pull cord and a key.</p>
<h2>Detailed features of the Hammar MA1 refill kit</h2>
available
• 
