available
€84.90 Tax included
error
Shipped according to supplier's deadline
-
Livraison en points relais : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
A bracket to attach most depth finders to your kayak
Made of high quality plastic, the Starport tray is easy to install horizontally or vertically, and is compatible with many surfaces and the majority of the accessories in the Rail Blaza range.
It is equipped with a "locking" system for the accessory.
The tray will allow you to fix your rod holder, your storage box, your diving pavilion or many other accessories of the Railblaza brand.
Detailed features of the Railblaza probe and transducer holder
- 1 x SwivelPort
- 1 x adjustable joint (not available separately)
- 1 x StarPort Extender fixed
- 1 x Cheek mounting adapter (not available separately)
- Cable ties
In the same category
4 other products seleted for you-
<h2>A long bracket to fix the sounder under your kayak or dinghy</h2>
<p>Made of high quality, extremely durable plastic, the Kayak & Dinghy Transducer Arm XL extension is easy to install with a tilt angle. It allows you to attach the transducer of your fishfinder deep under the Kayak or Dinghy.</p>
<h2>Detailed features of the Railblaza Probe and Transducer Holder</h2>
unavailable
-
<h2><span>The RailMount securely attaches and holds RAILBLAZA accessories to your boat's rails or balconies.</span></h2>
<p><span><span>The RAILBLAZA RailMount is a basic bracket that allows you to easily and securely attach RAILBLAZA accessories to your rails. </span><span>The RailMount can be mounted on round rails, such as kayaks and other marine equipment.</span></span>This marine rail mount is ideal for those who need to use it to hold different accessories, or those who want to change the location of their rod holder II, net table, or three-axis GPS platform. The RailMount is simply screwed on with no drilling, making it easy to move to a different location, leaving your rail looking like new!</p>
<p>It is also available in 32-41mm which can<span> be mounted on round and square boat rails, the 32-41 being specifically designed to fit Aka rails and H-H rails on Hobie kayaks.</span></p>
<h2><span>Features of the Railmount :</span></h2>
available
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p>
<h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
unavailable
-
<h2>The adhesive tray Quickport is suitable for pneumatic supports</h2>
<p><span>It is made of high quality plastic. <span>Mounting rod holders and other accessories on inflatable and pneumatic boats is even easier. </span></span>It features an accessory "lock" system and is compatible with many surfaces and the majority of Rail Blaza accessories. The new 3M VHB pad allows you to peel and stick the holder and then fit it to your favorite RAILBLAZA accessories such as your rod holder, storage bin, diving horn or many other Railblaza accessories.</p>
<h2>Detailed characteristics of the Quickpoert receiver from Railblaza</h2>
available
• 
