available
Detailed features
Plug for blocking the auto release of a self-inflating life jacket
This accessory will allow you, once screwed on the UML prosensor or MK5 firing pin of your automatic lifejacket, to avoid the automatic activation of the lifejacket. This can be very useful either to store your lifejacket in a wet boat or to use the lifejacket while keeping the inflatable function but only in manual mode. With the UML release blocked, you can dive into the water, jet ski, wakeboard or do any other activity that is in constant contact with the water. Keep the manual release function safe for risky situations.
- Compatible with UML Prosensor, MK5 Yellow, MK5 Black triggers
You might also like 1 other product seleted for you
-
<div class="fiche-txt">
<h2>A FlashLight to be integrated in the lifejacket!</h2>
<p>This heavy-duty, compact lamp can be clipped onto a strap of <strong>automatic lifejacket</strong> and is triggered by contact with water in the event of a fall into the sea. The flashes generated by this flashlight are visible for several kilometers around and this for a duration of 12 hours. This significantly increases the chances of survival in the event of an accident. The extra flat dome of the lamp and the tamper-proof clip make it very resistant also during rescue operations. Can be turned off manually once triggered. Fits all types of straps (vests, wetsuits, survival suits) up to 40mm wide.</p>
<h2>Find all the safety equipment for the boat on Picksea.com</h2>
<p>Life jackets, lanyards, harnesses, regulatory and mandatory equipment on board a boat, find the Picksea selection of the best products for safety equipment on our accessories and safety at sea area. Ask our team for advice on 02 85 52 65 01</p>
<h2>Detailed characteristics of the lamp Flash Auto W4 Dianiamant Solas</h2>
</div>
available
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>A flashlight for life jackets : Compulsory equipment when boating</h2>
<p>This flashing light complies with the current boat safety standards (division 240) so that you can be seen in an emergency situation. Designed to be integrated into the CrewSaver lifejackets, it is activated by contact with water in the event of a fall into the water and the opening of the lifejacket. Integrated as standard in the Ergofit Crewsaver range, it can be added as an option on tious other lifejackets.</p>
<h2>Features of the Crewsaver flashlight</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Reload your UML automatic firing pin vest with this reset kit</h2>
<p>These recharging kits, which include a CO2 refill and a black cellulose capsule, will allow you to refill your UML automatic firing lifejacket.</p>
<h2>Which kit to choose according to your Crewsaver vest ?</h2>
<ul><li>23g for Crewfit Junior 150N vests</li>
<li>33g for Crewfit 165N Sport Vests</li>
<li>38g for 180N and 190N vests</li>
<li>60g for 290N vests</li>
</ul><h2>Features of the UML Crewsaver automatic reset kit</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The lightweight and compact GPS beacon</h2>
<p>This PLB FASTFIND 220 individual distress beacon is easy to use, both on land and at sea. Thanks to the integrated GPS system, the signal is quickly sent in 3 minutes and your position is regularly updated every 20 minutes. It offers a good autonomy with its lithium battery with a longevity of 6 years. Light and compact, delivered with a floating case and waterproof up to 10m. A flash light allows you to be spotted at night by the emergency services.</p>
<h2>Detailed technical characteristics of the Fastfind 220 Mc Murdo beacon</h2>
</div>
available
-
<div class="fiche-txt">
<h2>PROSENSOR Elite Trigger</h2>
<p><span>Trigger cylinder for the replacement of the UML PROSENSOR ELITE automatic firing pin. Compatible with 33gr CO2 cartridges, for 4W Prosensor Elite automatic vests.</span></p>
<p></p>
</div>
available
• 
