available
€140.00 Tax included
error
Shipped according to supplier's deadline
-
Livraison en points relais : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
The NAUDET series 10 tide clock
This tide clock is available in chrome or brass. It has a collar, which will allow you to fix it on the wall. Its clockwork is set on the lunar day. The dial is engraved with a UV-resistant laser. You will have to adjust this clock according to the place where you will use it. In addition, to minimize the difference between the indicated value and the true tide time, it is recommended to make the adjustment on new moon days.Characteristics of the NAUDET Series 10 Tide Clock
- Weight: 358 g
- Dial/Collar/Height: 100 / 135 / 47 mm
- Diameter of the dial: 100 mm
- Metal thickness: 0.8 mm
- Mineral glass
- Adjustment knob on the back of the case
- Access to the adjustment by removing the cover and the flange
In the same category
4 other products seleted for you-
<h2><span>Plastimo Boat Heel Indicator</span></h2>
<p><span>Also known as a gyro, it is an essential tool for the correct adjustment of the boat's trim in the water (</span><span>from dinghy to Class 1). </span><span>Designed for indoor or outdoor use.</span></p>
<h2><span>Characteristics of the heel indicator</span></h2>
available
-
<div>
<h2>The REGATTA 100 mm diameter board watch from BARIGO</h2>
<div>This 100 mm diameter on-board watch will fit perfectly on your boat. It is part of the 100 REGATTA range from BARIGO which is exclusively made of polished stainless steel.</div>
<h2>The characteristics of the REGATTA 100 mm diameter edge watch from BARIGO</h2>
</div>
available
-
<div class="fiche-t">
<h2>The VIKING 130 mm silent zone board watch from BARIGO</h2>
<div class="fiche-t">This watch with a 130 mm diameter dial will be perfect to see the time on your boat and to have a good readability of the information. It is available in brass or chrome version. Varnished and treated against corrosion.</div>
<h2>The characteristics of the VIKING 130 mm silent zone board watch from BARIGO</h2>
</div>
available
-
<h2>The parallel ruler: the most traditional way to measure your routes and bearings</h2>
<p>The parallel ruler is the oldest and most traditional way to measure and trace routes and bearings. The principle is simple: the ruler is placed on the road to be measured and then, like a pantograph, the other part of the ruler is placed on one of the declination roses on the map to determine the angle.</p>
<h2>Features of the Flash-Tide parallel ruler</h2>
available
• 
