available
Detailed features
Magic Marine Quick Release Strap
Ideal strap to attach the mainsail to the boom for ideal storage, with quick release.
Features of the Magic Marine Quick Release Strap
- Possible sizes: S 30cm-40cm M 40cm-65cm L 60cm-85cm
- Unique color
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Euromarine bow fenders</h2>
<div class="fiche-txt">These fenders are rotomoulded in one piece. They have a non-return valve with 3 anchor points. The fenders have a 3-point check valve and 3 anchor points, with 3 fixing holes for a secure hold, perfect for protecting the bow of your boat.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Euromarine's bow fenders</h2>
</div>
available
-
<h2>Fitting for Plastimo valve :</h2>
<p>The valve fitting will allow you to inflate bumpers or fenders from the Plastimo Performance range and is compatible with all Plastimo inflators. Its diameter is 14 mm.</p>
<p>You can check the ideal pressure at any time using a pressure gauge or by measuring the circumference.</p>
<h2>Characteristics of the Plastimo valve fitting :</h2>
available
-
<div>
<h2>Plastimo's Performance inflatable fenders</h2>
<div><span>Inflatable fender from the Performance range, made of shiny, UV-resistant soft PVC. </span></div>
<div><span>Can be used horizontally or vertically.</span><br /><span>Thanks to the design of the ends, the PVC flows perfectly from one end of the mould to the other during the baking process.</span><br /><span>The material is thus distributed very evenly over the entire fender: whatever the point of impact on the fender, the shock absorption is optimal.</span></div>
<div><span>Delivered uninflated, with rope: Remember to bring the Plastimo valve connector for easy and quick inflation.</span></div>
<div><span>You can check the pressure of the fender at any time with a pressure gauge or by measuring the circumference of the fender.</span></div>
<div></div>
<h2>The characteristics of Plastimo's Performance fenders:</h2>
</div>
available
-
<h1 class="product--view--title">Bumper for pontoons</h1>
<div class="product--view--caption entry mCustomScrollbar _mCS_1">
<div id="mCSB_1" class="mCustomScrollBox mCS-light mCSB_vertical mCSB_inside">
<div id="mCSB_1_container" class="mCSB_container" dir="ltr">
<div class="pvc-description entry">
<p>Genuine patented bumper to be fixed on the pontoon. Depending on its location, this bumper will protect the bow or the side of your boat so that it does not get damaged against the pontoon. Can be used on any type of pontoon and purlin thanks to its system <span>without drilling (</span>the head of the bolt locks into the groove) and can also be adapted to all pontoons with an adjustment range of 40 to 120 mm from the edge of the pontoon.</p>
<h2>Characteristics of the Bumper for pontoons</h2>
</div>
</div>
</div>
</div>
available
• 
