available
Detailed features
The International HT80 pump
This pump is suitable for the Boatyard pack. It allows an excellent mixing ratio between the base and the hardener.
Features of the International HT80 pump
- For the Boatyard pack
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>An ecological polish with lemon for a better glide</h2>
<div class="fiche-txt">This McLube polish is recommended by Harken. Made from lemon, it is totally environmentally friendly. It provides a deep clean and protects the hull while significantly improving the glide of your boat. A polish that lasts and gives a shiny appearance to your hull and protects it against UV.</div>
<div class="fiche-txt"></div>
<h2>Mc Lube products recommended by Harken for a perfect glide</h2>
<p>Harken recommends the McLube brand for its high performance cleaning and maintenance products. Whether it's greasing blocks and cleats (One Drop), sliding sails in the mast or boom (Sailkote) or polishing your hull (Speed Polish and Hullkote) McLube products will significantly improve the performance of your boat.</p>
</div>
available
-
<div class="fiche-txt">
<h2>Interior Finish 770 from International</h2>
<div class="fiche-txt">This product will be very useful for polyurethane finishes. It is a high quality bi-component for interiors. It has a uniform satin appearance. It is an excellent solution for ceilings, and any other areas where you do not want a glossy finish.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Interior Finish 770</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Matt Chem's HYDREX moisture extractor</h2>
<div class="fiche-txt">It is preventive and curative for electrical and electronic devices. It will prevent corrosion and ensure long-lasting protection thanks to its additives. It will also avoid the failures of ignition and short-circuit. This product is waterproof.</div>
<div class="fiche-txt"></div>
<h2>Features of the Matt Chem HYDREX moisture extractor</h2>
</div>
available
-
<div>
<h2>INTERFILL 830 epoxy coating from International</h2>
<div>This coating is the best possible choice for profiling steel or aluminium hulls and areas in the water or underwater. It is a two component, light grey colour. It is very hard and impact resistant. It is very easy to sand and it will provide you with a waterproofing.</div>
<div></div>
<h2>Characteristics of International INTERFILL 830 epoxy coating</h2>
</div>
unavailable
• 
