available
Detailed features
Matt Chem's GB12 Battery Protective Grease
This grease contains an indicator that automatically detects excess acid by turning bright red upon detection. It will prolong the life of your batteries and protect them in any atmospheric or corrosive conditions.
Features of the Matt Chem GB12 battery protector
- Elimination of sludge, grease and corrosion
- Prevention of future corrosion
- Checks for excess acid in your battery
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>Matt Chem's SELECT HT Dielectric Degreasing Solvent</h2>
<div class="fiche-txt">It has been specially designed and formulated for electronic and electrical equipment. It will allow you to dissolve oils, greases and all carbon deposits on the contacts. It evaporates relatively quickly and leaves no residue. It will not attack plastic materials.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of Matt Chem's SELECT HT dielectric degreasing solvent</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Fibreglass surface Prep from International</h2>
<div class="fiche-txt">This product allows you to eliminate the waxes of mouldings, which will avoid you to sand the gelcoat before applying another product. It can also be used to prepare alkyd paints. Ideal for submerged areas.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of the Fibreglass surface Prep by International</h2>
</div>
unavailable
-
<div>
<h2>INTERFILL 830 epoxy coating from International</h2>
<div>This coating is the best possible choice for profiling steel or aluminium hulls and areas in the water or underwater. It is a two component, light grey colour. It is very hard and impact resistant. It is very easy to sand and will provide a good seal of the coated parts.</div>
<div></div>
<h2>Features of International INTERFILL 830 Epoxy Coating</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International's anti-slip powder</h2>
<div class="fiche-txt">This powder is synthetic and can be added to finishes prior to application or sprinkled on a wet film for a non-slip coating. It does not affect the drying time and does not change the way the finish is applied.</div>
<div class="fiche-txt"></div>
<h2>The characteristics of International's anti-slip powder</h2>
</div>
available
• 
