unavailable
Detailed features
Nautical's primer & undercoat for exposed areas
This product has two possible uses: as a primer or as an undercoat. It is easy to apply and quick drying. It is recommended for use before Nautical Gloss Enamel. Be careful not to overcoat with two-component products.
The characteristics of Nautical's primer & undercoat for exposed areas
Nautical primer & undercoat | Use |
Cleaner/Diluent | Nautical NT1 |
Number of layers | 2 minimum |
Coverage (theoretical) | 10.5m²/L with brush or roller, and 5.47m²/L with spray gun |
VOCS | 506g/L |
Mode of application | Brush, roller, gun |
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>The International Gelshield 200</h2>
<div class="fiche-txt">This is a protective epoxy primer that will protect your polyester against osmosis. It has the advantage of being very fast drying and easy to apply. You can apply several coats in one day. It requires 5 coats to protect against osmosis.</div>
<div class="fiche-txt"></div>
<h2>Features of the International Gelshield 200</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>International Perfection Undercoat</h2>
<div class="fiche-txt">It is a high performance polyurethane undercoat. It is a two component product, so it should not be applied over one component products. International Perfection Undercoat provides an excellent base for a long lasting glossy finish. It is easy to apply, quick drying and easy to sand. It has a satin finish.</div>
<div class="fiche-txt"></div>
<h2>Features of International Perfection Undercoat</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The VC TAR 2 primary from International</h2>
<div class="fiche-txt">This primer will protect your polyester against osmosis and provide an excellent corrosion barrier for metal substrates. With this primer you will not need to sand between coats as it has a self-levelling formulation. It is ideal for antifouling.</div>
<div class="fiche-txt"></div>
<h2>Features of the International VC TAR 2 Primer</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The Gelshield Plus Kit from International</h2>
<div class="fiche-txt">This epoxy primer is a non solvent based osmosis treatment. It is compatible with different substrates: fully cured polyester and epoxy coatings. Please note that this Gelshield Plus Kit should not be applied directly to the gelcoat.</div>
<div class="fiche-txt"></div>
<h2>Features of the Gelshield Plus Kit from International</h2>
</div>
unavailable