available
Detailed features
Matt Chem's SORB-OIL oil and hydrocarbon absorbent sheets
These sheets are pre-cut in double thickness. They are completely hydrophobic, i.e. they float on water even when saturated.
The characteristics of Matt Chem's SORB-OIL oil and hydrocarbon absorbent sheets
- 1 sheet absorbs 1.5 L
- Packaging: 3 sheets
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>International Epoxy Finishing Filler</h2>
<div class="fiche-txt">This coating is a two-component epoxy finishing coating. Very easy to apply, it is also easy to sand. You can use it on both emerged and immersed areas. It has a matt appearance.</div>
<div class="fiche-txt"></div>
<h2>Features of International Epoxy Finishing Filler</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Masking tape 30mm width :</h2>
<div class="fiche-txt">This is a strip of adhesive paper that will allow you to make clean paint and antifouling lines on your boat. For interior painting.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of masking tapes 30 mm :</h2>
</div>
available
-
unavailable
-
<div class="fiche-txt">
<h2>Matt Chem's HYDREX moisture extractor</h2>
<div class="fiche-txt">It is preventive and curative for electrical and electronic devices. It will prevent corrosion and ensure long-lasting protection thanks to its additives. It will also avoid the failures of ignition and short-circuit. This product is waterproof.</div>
<div class="fiche-txt"></div>
<h2>Features of the Matt Chem HYDREX moisture extractor</h2>
</div>
available
• 
