available
€229.00 Tax included
error
Shipped according to supplier's deadline
-
Livraison à domicile : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
Glowfast Glow-in-the-Dark Sail Adhesive
This sail adhesive will allow you to fine-tune night sails by accurately showing their shape. It will only need a 10 minute recharge to be visible for 20 hours. You can also use it for sail bag recognition, marking wheels, support points... It is designed to withstand extreme environments.
Glowfast Glow-in-the-Dark Adhesive Features
- 25 m coil
- Photo-luminescent
- 10 minutes of recharge for 20 hours of visibility
- Available in 30 mm, 40 mm and 65 mm
- Sold by the meter
In the same category
4 other products seleted for you-
<h2 class="fiche-txt">The Padeye Stick-On Round in carbon or glass fiber by INO-ROPE</h2>
<p class="fiche-txt" style="text-align:justify;"><span>Tested under the worst conditions, Ino-Padeyes are guaranteed for a range of breaking loads from 150 to 300 kg, with Sikaflex 292i bonding. They are therefore perfectly adapted to applications with low to medium loads, on or below deck: mooring of canvas, batteries, liferaft, bollards, fixing of the electrical panel (Ino-Padeye with thread), hooking of fittings with manual force recovery and in general replacing all the small classic stainless steel bridges.</span></p>
<div class="fiche-txt"></div>
<h2>Detailed features of the Padeye Stick On Round</h2>
available
-
<p style="text-align:justify;">The PXR Spinlock cleats provide the best control for large sails, fast and accurate control of hand-laid lines. This makes them ideal for single-ended spinnaker halyards. The range is divided into two sizes: 2-6 mm and 8-10 mm, and four profiles: Retrofit (T), Turret (SW), Central Pivot (VP) and Mast Attachment.</p>
<p style="text-align:justify;"><strong>RETROFIT (T)</strong></p>
<p style="text-align:justify;">The retrofit jammers have their holes adjusted to allow the replacement of traditional cleats. The 2-6 mm version (27 mm holes) for control rods and the 8-10 mm version (38 mm holes) suitable for mainsail jammers, boom vang blockers, boom vang blockers and runners.</p>
<p style="text-align:justify;"><strong>TOURELLE (SW)</strong></p>
<p style="text-align:justify;">The 2-6 mm version is ideal for use as a blocker for centre and downhaul jib sheets on dinghies. The 8-10 mm version of the PXR blocker is more suitable for control applications on the swivel cleats of large boats.</p>
<p style="text-align:justify;"><strong>CENTRAL PIVOT (CP)</strong></p>
<p style="text-align:justify;">Only available in 2-6 mm, this profile is ideal for guiding control lines on the sides, under the boom, for boom vang or catamaran sprit.</p>
<p style="text-align:justify;"><strong>MOUNTING ON THE MAST</strong></p>
<p style="text-align:justify;">These two models PXR0206 and PXR0810 fit on your mast. They are suitable for most keelboats up to 24 feet.</p>
available
-
<h2>Mooring protection</h2>
<p>Plastimo's Spiroll Mooring Protection is a clever sleeve that wraps around the friction areas of your mooring lines to protect them from premature wear and tear and also to reduce noise in the mooring cleats. Easy to install and remove thanks to its roll-up system.</p>
<h2>Detailed characteristics of the mooring line holder</h2>
available
-
<div class="fiche-txt">
<h2>The 38 cm windvane by Hawk for cruising and racing boats up to 20m</h2>
<div class="fiche-txt">This Hawk windvane is designed for cruising and racing boats up to 20 metres. Its profile has been developed in a wind tunnel. It is very stable with its adjustable counterweight. It is easy to install on all types of masts.</div>
<h2>Features of the Great Hawk 15' (38cm) wind vane by Hawk</h2>
</div>
available
• 
