available
Detailed features
Matt Chem's HYDREX moisture extractor
It is preventive and curative for electrical and electronic devices. It will prevent corrosion and ensure long-lasting protection thanks to its additives. It will also avoid the failures of ignition and short-circuit. This product is waterproof.
Features of the Matt Chem HYDREX moisture extractor
- Restores dielectric constants
- Can be sprayed on candle heads and in the delco
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>International Epoxy Finishing Filler</h2>
<div class="fiche-txt">This coating is a two-component epoxy finishing coating. Very easy to apply, it is also easy to sand. You can use it on both emerged and immersed areas. It has a matt appearance.</div>
<div class="fiche-txt"></div>
<h2>Features of International Epoxy Finishing Filler</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Matt Chem's bilge and engine cleaner</h2>
<div class="fiche-txt">It is an emulsifiable liquid in aqueous phase, it favours the elimination of accidental oil and hydrocarbon spills that cannot be collected. It will perfectly eliminate mineral and crude oils.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Matt Chem's bilge and engine cleaner</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Matt Chem's Proplast protective plastic film</h2>
<div class="fiche-txt">It will leave a resistant, transparent and flexible plasticized film on the treated supports. It resists to external aggressions due to a sulphurous atmosphere, chlorinated waters, oils, saline mists, ... It will protect and give a new aspect to surfaces, engines, hoses, cables, stainless steel, anodized aluminium, ...</div>
<div class="fiche-txt"></div>
<h2>The characteristics of Matt Chem's Proplast protective plastic film</h2>
</div>
available
-
<div>
<h2>INTERFILL 830 epoxy coating from International</h2>
<div>This coating is the best possible choice for profiling steel or aluminium hulls and areas in the water or underwater. It is a two component, light grey colour. It is very hard and impact resistant. It is very easy to sand and will provide a good seal of the coated parts.</div>
<div></div>
<h2>Features of International INTERFILL 830 Epoxy Coating</h2>
</div>
unavailable
• 
