available
€92.00 Tax included
error
Shipped within 10 days
-
Livraison en points relais : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
Complete re-arming kit for Spinlock 275 Hammar
- Specifically designed for Spinlock DECKVEST HAMMAR 275N hydrostatic vests
In the same category
4 other products seleted for you-
<h2>UML Pro Sensor 150N Automatic Vest Refill Kit</h2>
<p>Refill kit consisting of a 33 gram 150N adult CO2 cartridge and the UML trigger. This standard kit is perfectly adapted for the Skipper Automatic 150N waistcoat but also for any other automatic waistcoat using the UML 150N firing pin with a 33 gram CO2 cartridge.</p>
available
-
<h2>Plastimo Hammar refill kit for MA1 inflatable vest</h2>
<p><span>Refill kit for Pilot 150-165, EVO 165, Quickfit 150 with automatic percussion, Hammar hydrostatic system. With MA1 percussion head. Designed for easy maintenance of your inflatable vest.</span><span> The kit </span>contains a 33g CO2 gas cylinder, a hydrostatic release with manual pull cord and a key.</p>
<h2>Detailed features of the Hammar MA1 refill kit</h2>
available
-
<h2>The PLB GNSS Personal Beacon</h2>
<p>The 406 Mgz Personal Locator Beacon with GNSS can be used at sea but also when hiking. After reporting your departure and destination on the dedicated website, the SAFELINK SOLO will transmit your personal identifier and your GNSS position (GPS+Galileo) to the Cospas-Sarsat global distress system. In case of trouble, rescuers will be regularly informed of your position and will locate you with precision. These beacons, designed for individual use at sea or in rivers, are easy to carry and comply with the COSPAS-SARSAT standard: waterproof with a minimum of 24 hours operation. The beacon emits a digital signal that allows identification and position by satellite on 406 MHz (5 watts) and at the same time a homing signal on 121.5 MHz guiding the rescuers to the location even without visibility.</p>
<p>Caution! PLB beacons are serialized by default. At the time of purchase, you will need to register your beacon with the relevant authorities in the country corresponding to the serialized coding.</p>
<h2>Characteristics of the PLB individual beacon</h2>
available
-
available
• 
