available
Detailed features
UML Pro Sensor 150N Automatic Vest Refill Kit
Refill kit consisting of a 33 gram 150N adult CO2 cartridge and the UML trigger. This standard kit is perfectly adapted for the Skipper Automatic 150N waistcoat but also for any other automatic waistcoat using the UML 150N firing pin with a 33 gram CO2 cartridge.
- Caution, not suitable for refills of Hammar trigger waistcoats
- This kit cannot be shipped by air as it contains a product prohibited by international civil aviation regulations (CO2 cartridge). For overseas shipment, Picksea will always ship these products by sea and not by air. Please allow approximately 3 weeks for delivery.
- CO2 cartridge 33 grams.
- UML Automatic Firing Device
You might also like 1 other product seleted for you
-
<div class="fiche-txt">
<h2>PROSENSOR 4 Water trigger</h2>
<p><span>Trigger cylinder for the replacement of the UML PROSENSOR automatic firing pin. Compatible with 33gr CO2 cartridges, for 4W Prosensor automatic vests. Trigger only, sold without cartridge</span></p>
<p></p>
</div>
available
In the same category
4 other products seleted for you-
<h2>Personal AIS MOB beacon waterproof to 50 m</h2>
<p>The Amec TB 520 beacon, is a man overboard personal positioning beacon, using AIS technology. Vessels equipped with an AIS receiver in the vicinity of a person in the water carrying the TB520 beacon are alerted and receive the person's GPS position information. In emergency situations the beacon can be activated either automatically by the immersion sensor or manually. Its high performance GPS receiver allows the rapid acquisition of GPS coordinates. The TB520 beacon is small, but ultra reliable, and lightweight</p>
<h2>Features of the TB520 beacon:</h2>
unavailable
-
<h2>Plastimo Hammar refill kit for MA1 inflatable vest</h2>
<p><span>Refill kit for Pilot 150-165, EVO 165, Quickfit 150 with automatic percussion, Hammar hydrostatic system. With MA1 percussion head. Designed for easy maintenance of your inflatable vest.</span><span> The kit </span>contains a 33g CO2 gas cylinder, a hydrostatic release with manual pull cord and a key.</p>
<h2>Detailed features of the Hammar MA1 refill kit</h2>
available
-
<p>Refill kit consisting of a 33 gr 150N adult CO2 cartridge and the Hammar trigger. This standard kit is perfectly suited for the Hammar 150N FORMULA waistcoat.</p>
available
-
<div class="fiche-txt">
<h2>Switch your Deckvest Spinlock vest to Manual mode!</h2>
<p>For water sports enthusiasts such as Jet Ski, Wake or Kayak, an automatic vest is not suitable because it would be triggered too easily when in contact with water. For this use, Spinlock recommends the use of this kit to switch your Deckvest Pro Sensor Elite vest to manual mode. Installed in a few minutes, this cap allows you to deactivate your UML firing pin so that you can dive into the water without risking the inflation of your vest.</p>
<h2>Spinlock, boat safety is not a luxury</h2>
<p>The English brand develops and produces safety accessories for the professional and amateur sailor with reference products such as the Deckvest 5D, the rolls of the offshore lifejacket, integrating the harness, a flash light, an eye cutter and a retractable anti-spray hood. Essential for the equipment of professional sailors, it is also the choice of demanding boaters in terms of safety at sea.</p>
</div>
available
• 
