available
Detailed features
Characteristics of the Plastimo Pontoon Fender Fixing Kit
Set of 4 stainless steel fixings to fix the Bumper - Pontoon Fender in the aluminium profile of the pontoon.
- Set of 4 sets (special pontoon bolt + washer + nut)
- Material: stainless steel
In the same category
4 other products seleted for you-
<h2>Fender to protect the bow of your boat</h2>
<p>The bow fender is made of one-piece rotomolded white PVC and is UV resistant. It features a durable brass check valve and 3 mounting holes for a secure fit. Perfect for protecting the bow of your boat.</p>
<h2>Characteristics of the bow fender</h2>
available
-
<div class="fiche-txt">
<h2>Euromarine bow fenders</h2>
<div class="fiche-txt">These fenders are rotomoulded in one piece. They have a non-return valve with 3 anchor points. The fenders have a 3-point check valve and 3 anchor points, with 3 fixing holes for a secure hold, perfect for protecting the bow of your boat.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of Euromarine's bow fenders</h2>
</div>
available
-
<div class="fiche-txt">
<h2>White inflatable fender F1, 61 cm lenght :</h2>
<p>These <strong>fenders</strong> or cylinder <strong>inflatable fenders</strong> made of high quality Extra Soft PVC with injected tips are a standard in the <a href="//www.picksea.com/fr/equipement-du-bateau">equipment of your boat</a> to hang on your freeboard or on your ropes. These rotomoulded fenders are equipped with completely watertight valves to avoid any unexpected deflation once on the boat. Protect your boat from bumps against docks and pontoons.</p>
<h2>Characteristics of the fender F1 61cm: </h2>
</div>
available
-
<h1 class="product--view--title">Bumper for pontoons</h1>
<div class="product--view--caption entry mCustomScrollbar _mCS_1">
<div id="mCSB_1" class="mCustomScrollBox mCS-light mCSB_vertical mCSB_inside">
<div id="mCSB_1_container" class="mCSB_container" dir="ltr">
<div class="pvc-description entry">
<p>Genuine patented bumper to be fixed on the pontoon. Depending on its location, this bumper will protect the bow or the side of your boat so that it does not get damaged against the pontoon. Can be used on any type of pontoon and purlin thanks to its system <span>without drilling (</span>the head of the bolt locks into the groove) and can also be adapted to all pontoons with an adjustment range of 40 to 120 mm from the edge of the pontoon.</p>
<h2>Characteristics of the Bumper for pontoons</h2>
</div>
</div>
</div>
</div>
available
• 
