unavailable
Detailed features
A long bracket to fix the sounder under your kayak or dinghy
Made of high quality, extremely durable plastic, the Kayak & Dinghy Transducer Arm XL extension is easy to install with a tilt angle. It allows you to attach the transducer of your fishfinder deep under the Kayak or Dinghy.
Detailed features of the Railblaza Probe and Transducer Holder
- Delivered with :
- 1 x SwivelPort
- 1 x adjustable joint (not available separately)
- 1 x Extension arm
- 1 x Mounting screw (not available separately)
- 4 Cable ties
- Note: This articulated arm is delivered without receiver or articulated platform
In the same category
4 other products seleted for you-
<div class="fiche-txt">
<h2>An ultra comfortable seat for your sit on top kayak</h2>
</div>
<div class="fiche-txt">This backrest with its seat is very resistant and very comfortable! Made of rubber, it adapts to the shape of your body and water will not soak into the seat, so it will not stay wet. Suitable for all sit-on-top kayaks, it can be fixed very quickly and adjusted with the straps on the sides.</div>
<div class="fiche-txt"></div>
<div class="fiche-txt">
<h2>The detailed characteristics of the Hi Confort seat</h2>
</div>
available
-
<h2>A rail-mounted system for SidePort® receivers</h2>
<p>Fast and versatile with the SidePort, this rail mounting system allows you to quickly move and secure the SideMount along the aluminum rail of your boat.</p>
<h2>Detailed features of the Railblaza Tracloader</h2>
unavailable
-
<h2>An extension to extend the distance of the Starport receiver</h2>
<p>This accessory allows you to raise the hanging point of your starport receiver.</p>
available
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p>
<h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
unavailable
• 
