available
€312.00 Tax included
error
Available within 3 days
-
Livraison à domicile : Gratuit
Une question ?
+33 2 97 11 80 95
Detailed features
Euromarine's rod mooring buoys Diameter 54cm :
Inflatable mooring buoy for dead bodies, in flexible rotomolded PVC, with short galvanized steel rod. The rod is positioned in the middle and the buoy is equipped with a unique brass valve, for easy inflation or deflation. The flexible PVC is anti-UV treated to guarantee its durability over time. It is possible to inflate it with a bicycle or car pump, with an appropriate adapter. Maximum expected pressure is 0.15 bar
The characteristics of rod mooring buoy :
- Composition Soft PVC with anti-UV treatment, Galvanized steel rod
- Diameter 54cm
- L1: 85.5cm L2: 17cm
- White colour
- Total buoyancy 98 Kg, Useful 58 Kg
- Weight 8.6 Kg
- Maximum pressure: 0.15 bar
In the same category
4 other products seleted for you-
<h2>Handydock Automatic Gaff End</h2>
<p>Specially designed to facilitate mooring, the Handydock 33 automatic gaff end works in both directions: for mooring or for releasing. Even under heavy load or tension, it is convenient to use, and withstands a pull of 1.5 tons. Made of fiberglass, it is buoyant and suitable for boats up to 20 meters.</p>
<h2>Features of the Handydock Automatic Pike pole</h2>
available
-
available
-
<div class="fiche-txt">
<h2>Jumbo regatta buoy PLASTIMO</h2>
<p>The Jumbo regatta buoy, designed for large boats, is easy to spot even on very long courses thanks to its height of 3.20 m. The buoy is made of 1100 decitex PVC, which makes it perfectly resistant to handling and possible collisions during regattas. The three reinforced fixing points, located under its base, allow it to be weighted according to the weather conditions.</p>
<h2>Detailed characteristics of the PL40266 PLASTIMObuoy</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Euromarine's rod mooring buoys Diameter 39 cm : </h2>
<div class="fiche-txt">Inflatable mooring buoy for dead bodies, in flexible rotomolded PVC, with short galvanized steel rod. The rod is positioned in the middle and the buoy is equipped with a unique brass valve, for easy inflation or deflation. The flexible PVC is anti-UV treated to guarantee its durability over time. It is possible to inflate it with a bicycle or car pump, with an appropriate adapter. Maximum expected pressure is 0.2 bar / 2.9 psi</div>
<h2>The characteristics of the rod mooring buoys</h2>
</div>
available
• 
