available
Detailed features
Euromarine's adjustable sail feeder
It is a white polyester braid with stainless steel staples. The bungee cord is self-adjusting to the desired size.
Characteristics of the Euromarine adjustable sail feeder
- Length: 50 cm -> Diameter: 5 mm
- Length: 60 cm -> Diameter: 5 mm
- Length: 100 cm -> Diameter: 8 mm
In the same category
4 other products seleted for you-
<div class="pvc-description entry">
<h2>Mooring rope Marina Line 16 spindles with hump</h2>
<p>The Plastimo Marina Line with hump is a two-tone (white and black) 16-spindle polyester rope ideal for mooring at the pontoon. It has a 30 cm loop spliced at one end. Choice of length and/or diameter.</p>
</div>
<div class="pvc-frame entry">
<h2>Characteristics of the Marina Line 16 spindle rope with hump</h2>
</div>
available
-
<div>
<h2>Euromarine 7 needles kit</h2>
<div>Made of nickel-plated hardened steel for easy needle penetration. This kit is perfect for stuffing (and wrapping), cooking (heavy canvas), sailing (tent), carpeting and weaving (bag).</div>
<h2>Characteristics of the Euromarine 7 needles kit</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The Globe 5000 halyard from FSE ROBLINE 5m</h2>
<div class="fiche-txt">It is mainly intended for use where minimum stretch and low weight are required. Its core is made of Dyneema SK78, it is covered by polyester 32. This allows the halyard to have an excellent cohesion between its sheath and its core so they will not slip between them. This rope can also be used unsheathed. It measures 5 meters.</div>
<div class="fiche-txt"></div>
<h2>Characteristics of the Globe 5000 halyard from FSE ROBLINE</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>The D-Spicer kit to make your own dyneema splices and loops</h2>
<p>The <strong>D-Splicer</strong> is a reference tool for sailors, riggers and sportsmen who make their own splices and loops on modern ropes. The conventional technical limits of splitting with hollow needles are beginning to be reached, especially with Dyneema ropes under 4mm diameter, as these can become a real challenge to split for splicing.</p>
<p><span>The handle of the D-splicer is made of anodized aluminum, this type of aluminum is reinforced by a surface treatment which confers a corrosion resistance to him, as for its needle it is out of stainless steel to resist the wet and salty environment.</span></p>
<p>The D-Splicer is suitable for the finest ropes (<strong>less than 4mm</strong>) and in other situations where conventional needles would not work.</p>
<h2>Detailed features of the D-splicer kit</h2>
</div>
available
• 
