available
Detailed features
Self-draining plugs to avoid water ingress and help emptying the kayak!
Intelligent, innovative and practical, the RTM self-draining plug allows water to drain from the sit-on-top cockpit while preventing water from rising up through the drain wells.These two ultra-practical self-draining plugs are equipped with a non-return system: water cannot enter your kayak thanks to a silicone valve, but it can leave it to help drain the water in your kayak.
Detailed characteristics of the self-bailing plugs of RTM - DAG
- Self-draining plugs
- Compatible with RTM and DAGkayaks
- Sold in packs of 2 caps
- 2 sizes available :
- Size M: RTM models (except MID-WAY and TRECK 2)
- Size L : Models DAG, TRECK 2 + Tribal, Tribal Ocean, Treck I and II, Kompak and Tarka rear
In the same category
4 other products seleted for you-
<h2>Railblaza storage bin</h2>
<p>It will allow you to store and keep safely all your personal belongings such as keys, phone, VHF, sun cream or a cup. This tray is adaptable where you want it thanks to the various adapters Starport (available on the site), you can install it <span>on your balcony, rail, console, pedestal, inflatable tube, gunwale or almost any surface.</span> <span>This unique design incorporates a movable partition, turning one end into a drink holder, or leaving the entire cap open to hold larger items.</span></p>
<h2>Its characteristics:</h2>
available
-
<h2>A buoyancy aid waistcoat that is notched for comfort and can be put on</h2>
<p>This simple and practical 50N buoyancy aid waistcoat is easy to put on and has a cut-out for comfort when paddling. Easy to put on, you can adjust it with the side and shoulder adjustment straps and the abdominal adjustment cord.</p>
<h2>Features of the RTM 50N Easy Buoyancy Vest</h2>
available
-
<h2>The adhesive tray starport is suitable for pneumatic supports</h2>
<p><span>It is made of high quality plastic. <span>Mounting rod holders and other accessories on inflatable and pneumatic boats is even easier. </span></span>It features an accessory "lock" system and is compatible with many surfaces and the majority of Rail Blaza accessories. The new 3M VHB pad allows you to peel and stick the holder and then fit it to your favorite RAILBLAZA accessories such as your rod holder, storage bin, diving horn or many other Railblaza accessories.</p>
<h2>Detailed characteristics of the Starport receiver from Railblaza</h2>
<p><br /><br /></p>
<p></p>
available
-
<h2>A receiver allowing to fix the majority of the accessories of the Railblaza brand</h2>
<p>Fast and versatile, the MiniPort TracMount is designed to fit most existing kayak rails, including YakAttack, Wilderness Systems, Native Watercraft and Yak Gear, with no tools required.<br /><br />Works without tools, easy to install and adjust by simply turning the MiniPort which screws directly into the track using our TracNut. Repositioning in the track is simple, just turn to release the tension.<br />Please note: <br />Designed to be used in light applications. If using for trolling with RodHolder, it should be used on the right (starboard) side, so that the MiniPort tightens up when the load starts to leave. If you use the left (port) side, the MiniPort will loosen up when the load hits the rod)</p>
<h2>Detailed characteristics of the Miniport receiver from Railblaza</h2>
unavailable
• 
