Jamming cleats
Harken, Spinlock : discover the brands proposed in our selection of cleats. On Picksea, you can find all the marine equipment and fittings you need at the best price. In case you are looking for a particular cleat, we have a selection of very good models in which you should find what you are looking for. Also, if you need any further advice or information, please do not hesitate to contact Picksea customer service. We have a selection of the most popular cleats in our shop, and we hope you find what you're looking for.
Read more
There are 22 products.
-
<p><span>These Harken spinners are lightweight and made of composite material. They have a stainless steel wear part for a longer life.</span></p>
<p><span>Available in three colours: red, black or yellow.</span></p>
available
-
<p style="text-align:justify;"><span>Harken's ball bearing wedges hold ropes securely and release them instantly for easy, precise adjustment. </span></p>
<p style="text-align:justify;"><span>This anodized aluminum model features superior power and durability for applications requiring constant adjustment.</span></p>
available
-
<div id="short_description_block">
<div id="short_description_content" class="rte align_justify">
<p style="text-align:justify;">These Harken spinners are lightweight and made of composite material. They have a stainless steel wear part for a longer life.</p>
<p style="text-align:justify;">Available in three colors: red, and yellow</p>
</div>
</div>
available
-
<p style="text-align:justify;">This cleat for all types of boats. With its neat look, this sailing accessory will allow you to block your rope perfectly. Attention Cleat delivered without the trigger guard.</p>
available
-
<div class="fiche-txt">
<h2>Wedge cleat kit with quick release guide</h2>
<p>These four Harken cleat kits feature quick-release wire guides installed at the exit of the cleat. They also feature low-friction, angled stainless steel wire guides that move the rope away from the cleat to prevent accidental jamming during maneuvers.</p>
<p>These products are ideal for quick line release, especially when lowering the spinnaker at a buoy. Made from durable composite materials, these Harken hardware products offer excellent value for money.</p>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat CL223W/R Loop Cleat</h2>
<div class="fiche-txt">This cleat opens on the side and acts as a fixed and adjustable point. Ropes with a maximum diameter of 6 mm.</div>
<h2>Features of the Clamcleat CL223W/R cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat Junior with CL203/R trigger guard</h2>
<div class="fiche-txt">Clamcleat Nylon black with bridge for 3 to 6 mm rope</div>
<h2>Features of the Clamcleat Junior with CL203/R trigger guard</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat open mini CL204/R</h2>
<div class="fiche-txt">It will allow the rope to be lowered into the teeth for a quick and easy release.</div>
<h2>Clamcleat mini CL204/R open features</h2>
</div>
available
-
<p style="text-align:justify;">The PXR Spinlock cleats provide the best control for large sails, fast and accurate control of hand-laid lines. This makes them ideal for single-ended spinnaker halyards. The range is divided into two sizes: 2-6 mm and 8-10 mm, and four profiles: Retrofit (T), Turret (SW), Central Pivot (VP) and Mast Attachment.</p>
<p style="text-align:justify;"><strong>RETROFIT (T)</strong></p>
<p style="text-align:justify;">The retrofit jammers have their holes adjusted to allow the replacement of traditional cleats. The 2-6 mm version (27 mm holes) for control rods and the 8-10 mm version (38 mm holes) suitable for mainsail jammers, boom vang blockers, boom vang blockers and runners.</p>
<p style="text-align:justify;"><strong>TOURELLE (SW)</strong></p>
<p style="text-align:justify;">The 2-6 mm version is ideal for use as a blocker for centre and downhaul jib sheets on dinghies. The 8-10 mm version of the PXR blocker is more suitable for control applications on the swivel cleats of large boats.</p>
<p style="text-align:justify;"><strong>CENTRAL PIVOT (CP)</strong></p>
<p style="text-align:justify;">Only available in 2-6 mm, this profile is ideal for guiding control lines on the sides, under the boom, for boom vang or catamaran sprit.</p>
<p style="text-align:justify;"><strong>MOUNTING ON THE MAST</strong></p>
<p style="text-align:justify;">These two models PXR0206 and PXR0810 fit on your mast. They are suitable for most keelboats up to 24 feet.</p>
available
-
<div class="fiche-txt">
<h2>Clamcleat CL260/R Line-lok Tensioners</h2>
<div class="fiche-txt">The Line-lok CL260/R tensioner (sold by 8 pieces) is very light and has been designed with a material that improves its performance when the temperature drops. It will be perfect for holding your tent guy wires or any other tensioned fabric in winter conditions. Its applications can be numerous: tents, caravans, gazebos, tarpaulins, shelters, masts, and radio antennas.</div>
<h2>Clamcleat CL260/R Line-lok Tensioner Features</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan's RF58 turret with wire and wedge</h2>
<div class="fiche-txt">It will allow blocking and releasing the rope from all angles. Used to control manoeuvres. The rope grab has a stainless steel bushing for minimum friction and wear. The wedge has thick aluminium plates, which will guarantee a minimum of deformation under load.</div>
<div class="fiche-txt"></div>
<h2>Ronstan RF58 turret detailed specifications</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat CL244/R boom cleat and clamps</h2>
<div class="fiche-txt">It is fixed on a post or a tube. Its alloy allows it to be very resistant. Its nylon clamp is maintained by two screws. Several diameters are available.</div>
<h2>Clamcleat CL244/R Features</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat Junior Racing Cleat</h2>
<div class="fiche-txt">This cleat is suitable for 3 to 6 mm rope.</div>
<h2>Features of the Clamcleat Racing Junior Cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>CL253/R trapeze cleat for trapeze system</h2>
<div class="fiche-txt">This cleat has been designed to adjust the height of the trapeze loop in dinghies or sport catamarans. Designed for ropes from 4 to 8 mm in diameter, it also exists in two finishes: Aluminium or anodised aluminium.</div>
<h2>Features of the Clamcleat CL253/R for trapeze system</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Ronstan Fiberglass Cleat</h2>
<div class="fiche-txt">This cleat offers unmatched locking power and allows you to lock and release ropes with ease. It is lightweight, reliable and corrosion-free.</div>
<div class="fiche-txt"></div>
<h2>Features of the Ronstan Fiberglass Wedge Cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The Ronstan carbon cleat</h2>
<div class="fiche-txt">This cleat will offer you a surprisingly strong blocking power. It will allow you to block and release ropes easily. Very reliable, it is light and will resist to corrosion.</div>
<div class="fiche-txt"></div>
<h2>Features of the Ronstan carbon cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>The starboard / port opening cleat</h2>
<div class="fiche-txt">This cleat is available for the Mk1 and Mk2 models.</div>
<h2>Characteristics of the starboard / port opening cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>Clamcleat CL222/R mini racing cleat</h2>
<div class="fiche-txt">This cleat is made of TLG aluminum, which makes it very light. It will be perfect for your ropes of diameter 3-6 mm. The distance between the pins is 36 mm.</div>
<h2>Features of the Clamcleat CL222/R mini racing cleat</h2>
</div>
available
-
<div class="fiche-txt">
<h2>CL236/R Racing Junior Mk1 Clamcleat top</h2>
<div class="fiche-txt">Bridged cleat with a sheave system to optimize adjustment and facilitate rope tensioning. Designed for ropes from 3 to 6 mm in diameter Available in Alu or Black Anodized Alu finish</div>
<h2>Characteristics of the CL236/R Racing Junior Mk1 clamp with CLamcleat top</h2>
</div>
unavailable
-
<div class="fiche-txt">
<h2>Racing Micro Wheel Cleat for CL826 and 827-11 Single Hoist for trapeze system</h2>
<div class="fiche-txt">This cleat has been designed for the dynamic adjustment of a rope in tension. The flying cleat makes a simple hoist. Designed for ropes from 4 to 6 mm in diameter, it also exists in two finishes: Aluminium or anodised aluminium.</div>
<h2>Clamcleat CL826-11 and CL827-11 Features</h2>
</div>
unavailable
-
<p><span>Essential accessory to install the cleats on the deck. Available with 2 possible centre distances 27mm or 38mm corresponding to MICRO or STANDARD cleats. <br /></span></p>
available
-
<p><span>Essential accessory to install the cleats on the deck. Available with 2 possible centre distances 27mm or 38mm corresponding to MICRO or STANDARD cleats. <br /></span></p>
available
Showing 1-22 of 22 item(s)
• 
